Dr. Dipayan Mondal
Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET)
Khulna -9203, Bangladesh. Phone: +88024777 33351-70 Ext-8431
Cell: +8801720279068, +8801920279068, Mail : [email protected], [email protected]
Website : www.kuet.ac.bd/me/dip/

National/International Journal

(Selected Papers)

15 Latifur Islam, Dipayan Mondal, Md. Ashraful Islam, and Pslash Das, "Effects of Heat Transfer Characteristics of R32 and R1234yf with Al2O3 Nanoparticle Through U-bend Tube Evaporator", Journal of Engineering, Art ID 9991809, Vol 2024, 24 Pages, 2024, Hindawi. https://doi.org/10.1155/2024/9991809
14 Palash Das, Dipayan Mondal, Md. Ashraful Islam, and Masuda Afroj Lily, Thermodynamic Performance Evaluation of a Solar Powered Organic Rankine Cycle(ORC) and Dual Cascading Vapor Compression Cycle (DCVCC): Power Generation and Cooling Effect".
13 Md. Zahid Hasan, Dipayan Mondal, "Experimental Investigation of H-Darrieus Vertical Axis Wind Turbine Using NACA 0018 Blade Profile", Mechanical Engineering Research Journal (MERJ), Vol. 13, CUET, Chattogram, Bangladesh.
12 Md. Abu Bkar PK, Md. Hasanuzzaman, Md. Mosharof Hossain, and Dipayan Mondal, Effects of Thermal Radiation and Variable Porosity on Unsteady Magnetoconvective Heat-Mass Transport Past a Vertical Perforated Sheet", Journal of Engineering, Art ID 8866265, Vol 2024, 13 Pages, 2024, Hindawi. https://doi.org/10.1155/2024/8866265
11 Palash Das, Md. Ashraful Islam, and Dipayan Mondal, "Analysis of thermomechanical stresses in dual compound thick cylinders under asymmetric loads: An analytical and numerical method", e24938, Vol 10, Issue 13, 2024, Heliyon, CellPress/Elsevier. https://doi.org/10.1016/j.heliyon.2024.e24938
10 P. Das, A. Benslimane, M.A. Islam*, D. Mondal, M. S. Nazim, "A heterogeneous thermo-mechanically loaded rotating FGM thick cylindrical pressure vessels under parabolic changing properties: analytical and finite element analysis (FEA)”, e25969, Vol 10, Issue-4, 2024, Heliyon, CellPress/Elsevier. https://doi.org/10.1016/j.heliyon.2024.e25969
9 P. Das, M.A. Islam, D. Mondal and M.S. Nazim, "Analytical and Numerical (FEA) Solution for Steady State Heat Transfer in Generic FGM Cylinder Coated with Two Layers of Isotropic Material Under Convective-Radiative Boundary Conditions”, e21725, Vol 9, Issue-11, 2023, Heliyon, CellPress/Elsevier. https://doi.org/10.1016/j.heliyon.2023.e21725
8 Dipayan Mondal, Atiqur R. Tuhin, Keishi Kariya, Akio Miyara, 2022. Measurement of kinematic viscosity and thermal conductivity of 3,3,4,4,5,5-HFCPE in liquid and vapor phases, International Journal of Refrigeration, Elsevier, Vol. 140, pp. 150-165. https://doi.org/10.1016/j.ijrefrig.2022.05.002.
7 Dipayan Mondal, Keishi Kariya, Atiqur R. Tuhin, Naomasa Amakusa, Akio Miyara, 2022. Viscosity Measurement for trans-1,1,1,4,4,4-hexafluoro-2-butene (R1336mzz(E)) in Liquid and Vapor Phases, International Journal of Refrigeration, Elsevier, Vol. 133, pp. 267-275. https://doi.org/10.1016/j.ijrefrig.2021.10.006.
6 Dipayan Mondal, Keishi Kariya, Atiqur R. Tuhin, Katsuya Miyoshi, Akio Miyara, 2021. Thermal Conductivity Measurement and Correlation at Saturation Condition of HFO Refrigerant trans-1,1,1,4,4,4-hexafluoro-2-butene (R1336mzz(E), International Journal of Refrigeration, Elsevier, Vol. 129, pp. 109-117. https://doi.org/10.1016/j.ijrefrig.2021.05.005
5 Dipayan Mondal, Yoshiya Hori, Keishi Kariya, Akio Miyara, and Md. Jahangir Alam, 2020. Measurement of Viscosity of a Binary Mixture of R1123 + R32 Refrigerant by Tandem Capillary Tube Method, International Journal of Thermophysics, Springer, Vol. 41, Issue 6, Art. no. & pp. 83 (1-20). https://doi.org/10.1007/s10765-020-02653-4.
4 Md Hasibul Hasan, Dipayan Mondal, 2020. Numerical Investigation of Finned-tube Heat Exchanger with Circular, Elliptical & Rectangular Tubes, WSEAS Transactions on Heat and Mass Transfer, Vol. 15, Art. #7, pp. 41-49. doi:10.37394/232012.2020.15.7; (https://www.wseas.org/wseas/cms.action?id=23191).
3 D. Mondal and M. A. Islam, 2019. Experimental Investigation on an Intermittent Ammonia Absorption Refrigeration System, Mechanical Engineering Research Journal (MERJ), Vol. 11, pp. 59–65, ISSN: 1990-5491.
2 Dipayan Mondal, Al-Imran, Md. Alamgir Alam, Mohammad Ariful Islam, 2014. Experimental Observation of a Small Capacity Vapor Absorption Cooling System, International Journal of Scientific & Engineering Research (IJSER), pp-456-467, Volume 5, Issue 8, ISSN 2229-5518.
1 Dipayan Mondal, Md. Owal Ikram, Md. Fazla Rabbi, Md. Nawsher Ali Moral, 2014. Experimental Investigation and Comparison of Bend Tube Parallel Flow & Counter Flow and Cross Flow Water to Air Heat Exchanger, International Journal of Scientific & Engineering Research (IJSER), pp-686-695, Volume 5, Issue 7, ISSN 2229-5518.


National/International Conference

(Selected Papers)

21 Latifur Islam, Dipayan Mondal, 2023. Flow Boiling Heat Transfer and Flow Pattern of R32 and Al2O3-R32 in U-bend Tube Evaporator, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2023(ICMERE2023), ICMERE2023-PI-065, November 2023,Chattogram, Bangladesh.
20 Md. Zahid Hasan, Dipayan Mondal, 2023. Experimental Investigation of H-Darrieus Vertical Axis Wind Turbine Using NACA 0018 Blade Profile, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2023(ICMERE2023), ICMERE2023-PI-064, November 2023,Chattogram, Bangladesh.
19 Atiqur R. Tuhin, Dipayan Mondal, Naomasa Amakusa, Keishi Kariya, and Akio Miyara, 2021. Measurement and prediction of viscosity and thermal conductivity of R1336mzz(E)", Proceedings of the JSRAE Annual Conference, pp. (paper number: 1467), Tokyo Institute of Technology (Tokyo Tech, Japan).
18 Dipayan Mondal, Atiqur R. Tuhin, Keishi Kariya, and Akio Miyara, 2021. Measurement of Thermal Conductivity of 3,3,4,4,5,5-HFCPE, Proceedings of the HFO2021 2nd IIR Conference on HFOs and Low GWP blends, pp. 200-207, JAPAN. Doi: 10.18462/iir.HFO.2021.1016.
17 Naomasa Amakusa, Dipayan Mondal, Atiqur R. Tuhin, Keishi Kariya, and Akio Miyara, 2021. Viscosity Measurement of R1336mzz(E) by tandem capillary tubes method, Proceedings of the HFO2021 2nd IIR Conference on HFOs and Low GWP blends, June 16-18, pp. 208-212, JAPAN. Doi: 10.18462/iir.HFO.2021.1015.
16 Atiqur R. Tuhin, Dipayan Mondal, Naomasa Amakusa, Keishi Kariya, and Akio Miyara, 2021. Measurement of Transport Properties of R1336mzz(E), Proceedings of the Twenty-First Symposium on Thermophysical Properties, Boulder, CO, USA. https://thermosymposium.org/pdf/Abstract_4518.pdf.
15 Atiqur R. Tuhin, Dipayan Mondal, Katsuya Miyoshi, Keishi Kariya, and Akio Miyara,2020. Kinematic Viscosity Measurement of 3,3,4,4,5,5 HFCPE, Proceedings of the 2020 JSRAE Annual Conference, Page-D112, Tsu-city, Mie, JAPAN.
14 Katsuya Miyoshi, Dipayan Mondal, Atiqur R. Tuhin, Keishi Kariya, and Akio Miyara, 2020. Thermal Conductivity Measurement of HFO Refrigerant R1336mzz(E), Proceedings of the 2020 JSRAE Annual Conference, Page-D113, Tsu-city, Mie, JAPAN. (in Japanese).
13 Yoshiya Hori, Dipayan Mondal, Keishi Kariya and Akio Miyara, 2019. Measurement of Viscosity of Low GWP Refrigerant R1224yd(Z), Proceedings of the 40th Symposium on Thermophysical Properties of Japan, Page-A313, Nagasaki, JAPAN. (in Japanese).
12 Dipayan Mondal, Yoshiya Hori, Keishi Kariya and Akio Miyara, 2019. Measurement of vapor viscosity of R1123/R32 mixture refrigerant by a tandem capillary tubes method, Proceedings of the 12th Asian Thermophysical Properties Conference (ATPC 2019), Xi’an Jiaotong University, Xi’an, CHINA.
11 Md Hasibul and Dipayan Mondal, 2018. Finned-tube Heat Exchanger with Circular, Elliptical & Rectangular Tubes with Water-vapor as Working Fluid, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2018), Paper ID-ICMIEE-18-201, Khulna University of Engineering & Technology (KUET), KHULNA, Bangladesh.
10 Md. Faidid Ahasan, Mohammad Fuad Hassan and Dipayan Mondal, 2018. Numerical Analysis of Energy Harvesting on a Wind Turbine Blade by Using Piezoelectric Material, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2018), Paper ID-ICMIEE-18-273, Khulna University of Engineering & Technology (KUET), KHULNA, Bangladesh.
9 Dipayan Mondal, Mohammad Ariful Islam, 2017. Experimental Investigation on an Intermittent Ammonia Absorption Refrigeration System, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2017), Paper ID- ICMERE2017-PI-379, Chittagong University of Engineering & Technology (CUET), Chittagong, Bangladesh.
8 Md.Kamar Uddin, Dipayan Mondal, Shafkat Bin Manjur, 2016. Design and Development of Software for Estimation of Cooling Load of Air Conditioning System, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2016), Paper ID- ICMIEE-PI-160215, Khulna University of Engineering & Technology (KUET), KHULNA, Bangladesh.
7 Md. Habib Ullah Khan, Dipayan Mondal , Shahidul Hoque, 2016. Design and Construction of Oil Expeller Press with Structural Analysis of Screw with ANSYS, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2016), Paper ID-ICMIEE-PI-160363, Khulna University of Engineering & Technology (KUET), KHULNA, Bangladesh.
6 S. M. Russel Kabir Roomey, Dipayan Mondal, Md. Rezaur Rahman, 2016. Design and Performance Analysis of a Gravity Powered Lamp, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2016), Paper ID-ICMIEE-PI-160334, Khulna University of Engineering & Technology (KUET), KHULNA, Bangladesh.
5 Md. Rezaur Rahman , Dipayan Mondal , S. M. Russel Kabir Roomey, 2016. Development and Performance Analysis of a solar Model Car, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2016), Paper ID-ICMIEE-PI-160335, Khulna University of Engineering & Technology (KUET), KHULNA, Bangladesh.
4 Dipayan Mondal, Md. Owal Ikram, Md. Faisal Ahmed, Md. Nawser Ali Moral, 2015. Experimental Analysis of Bend Tube Parallel Flow and Counter Flow Water to Air Heat Exchanger, Proceedings of the 7th International Mechanical Conference & 16th Annual Paper Meet (7th IMC & 16th APM) organized by Mechanical Engineering Division (MED), Paper ID-IMC-APM-HT-05, IEB, Dhaka, Bangladesh.
3 Faisal Ahmed, Dipayan Mondal , Mohammad Ariful Islam, 2014. Design, Construction and Performance Test of Generator and Condenser for a Small Capacity Vapor Absorption Cooling System, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), Paper ID-ICMIEE-PI-140254, KUET, Khulna, Bangladesh.
2 Dipayan Mondal, Md. Fazla Rabbi, Md. Nawser Ali Moral, 2014. Design Construction and Performance Test of a Cross flow Heat Exchanger, Proceedings of the 15th Annual Paper Meet (15th APM) organized by Mechanical Engineering Division (MED), Paper ID-APM-HT-04, IEB, Dhaka, Bangladesh.
1 Sobahan Mia, Md. Mahmudul Hassan, Dipayan Mondal, Muhsia Tabassum, 2013. Tribological Research And Industrial Applications In Bangladesh, International Conference on Mechanical, Industrial and Materials Engineering (ICMIME2013), Paper ID-IE34-123, RUET, Rajshahi, Bangladesh.