Dr. Md. Abul Hashem
Assistant Professor
Leather Engineering
Khulna University of Engineering & Technology (KUET)
Khulna -9203, Bangladesh. Phone: +880-41-769468-75 Ex-753 (Off.), Ex-754 (Res.)
Cell: +880-1674-590373, Fax: +880-41-774403, Mail : mahashem96@yahoo.com
Website : www.kuet.ac.bd/le/hashem/

International Journal

34 Md. Aminur Rahman, Sazal Kumar, Anika Amir Mohana, Rafiquel Islam, Md. Abul Hashem, Luo Chuanxiu, Coliform bacteria and trace metals in drinking water, southwest Bangladesh: multivariate and human health risk assessment, International Journal of Environmental Science and Technology, https://doi.org/10.1007/s13762-018-1714-y
33 Md. Aminur Rahman, Md. Abul Hashem, Arsenic, iron and chloride in drinking water at primary school, Satkhira, Bangladesh, Physics and Chemistry of the Earth, doi.org/10.1016/j.pce.2018.09.008
32 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Aziza Ahsan, Syeda Anika Bushra, Hair burning liming in tanneries: a potential sulfide source to the environment, Sustainable Water Resources Management, doi: 10.1007/s40899-018-0270-4
31 Md. Abul Hashem, Md. Abdul Momen, Mehedi Hasan, Leaf paste aided goat skin preservation: Significant chloride reduction in tannery, Journal of Environmental Chemical Engineering, doi:10.1016/j.jece.2018.06.050
30 Md. Abul Hashem, Md. Abdul Momen, Mehedi Hasan, Md. Shahruk Nur-A-Tomal, Md. Hasibur Rahman Sheikh, Chromium removal from tannery wastewater using Syzygium cumini bark adsorbent, International Journal of Environmental Science and Technology, doi: 10.1007/s13762-018-1714-y
29 Bishnu Chandra Barman, Md. Ariful Islam Juel, Md. Abul Hashem, Tannery wastewater treatment using low cost coagulants with simple coagulation-filtration process, Engineering International, Asian Business Consortium, Vol. 5(2), 75-82, 2017.
28 Zia Uddin Md. Chowdhury, Tanvir Ahmed, Md. Abul Hashem, "Materials and energy flow in the life cycle of leather: A case study of Bangladesh", Matériaux & Techniques,
doi.10.1051/mattech/2018013
27 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Tannery solid waste valorization through composite fabrication: A waste-to-wealth approach. Environmental Progress & Sustainable Energy, doi: 10.1002/ep.12860
26 Md. Abul Hashem, Md. Navid Arman, Md. Hasibur Rahman Sheikh, Md. Mazharul Islam, Sodium chloride substitute for lower salt goat skin preservation: a novel approach, JALCA, 2017, 112, 270-276.
25 Md. Abdul Motin, Md. Alim Uddin, Palash K. Dhar, M.A. Hafiz Mia, Md. Abul Hashem, Study of Electrochemical Oxidation of Catechol in the Presence of Sulfanilic Acid at Different pH. Portugaliae Electrochimica Acta, 2017, 35(2), 103-116.
24 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Nil Ratan Mondal, Md. Aminur Rahman, Hair burning and liming in tanneries is a source of pollution by arsenic, lead, zinc, manganese and iron. Environmental Chemistry Letters, 2017, 15(3), 501-506.
23 Sobur Ahmed, Fatema-Tuj-Zohra, M. S. Hider Khan, Md. Abul Hashem, Chromium from tannery waste in poultry feed: A potential cradle to transport human food chain. Cogent Environmental Science, http://dx.doi.org/10.1080/23311843.2017.1312767
22 Md. Abul Hashem, Adhir Chandra Paul, Sanzu Hosen, Abir Hasan, Renewable energy from the waste soles through thermal pyrolysis-A novel approach Bangladesh Journal of Scientific and Industrial Research, 52(2), 141-146, 2017.
21 Md. Aminur Rahman, Md. Abul Hashem , Md. Shahruk Nur-A-Tomal, Potable water quality monitoring of primary schools in Magura district, Bangladesh: Children’s health risk assessment. Environmental Monitoring and Assessment, doi: 10.1007/s10661-016-5692-6.
20 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Valorization of tannery limed fleshings through fat extraction: An approach to utilize by-product. Waste and Biomass Valorization, 2017, 8: 1219-1224.
19 Md. Abdul Motin, Md. Nazim Uddin, Palash K. Dhar, M. A. Hafiz Mia, Md. Abul Hashem, Voltammetric Electro-synthesis of Catechol-Aspartic Acid Adduct at Different pHs and Concentrations. Analytical & Bioanalytical Electrochemistry, 2016 (8) 505-521.
18 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Md. Joynul Abedin, Syeda Anika Bushra, Heavy metal assessment of polluted soil around Hatirjheel Lake of Dhaka city, Bangladesh. Bangladesh Journal of Scientific and Industrial Research, 52(1), 61-66, 2017.
17 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Syeda Anika Bushra, Oxidation-coagulation-filtration processes for the reduction of sulfide from the hair burning liming wastewater in tannery. Journal of Cleaner Production, 2016, 127, 339-342.
16 Kentaro Ezoe, Seiichi Ohyama, Md. Abul Hashem, Shin-Ichi Ohira, Kei Toda, Automated determinations of selenium in thermal power plant wastewater by sequential hydride generation and chemiluminescence detection. Talanta, 2016, 148, 609–616.
15 Sobur Ahmed, Fatema-Tuj-Zohra, Arup Sarker, Md. Abul Hashem, Short term preservation of goat skin with indigenous azadirachta indica leaf to reduce pollution load in leather processing. International journal of current research, 2015, 7(10), 21158-21161.
14 Md. Abul Hashem, Ahidul Islam, Shakila Mohsin, Md. Shahruk Nur-A-Tomal, Green environment suffers by discharging of high chromium containing wastewater from the tanneries at Hazaribagh, Bangladesh. Sustainable Water Resources Management, 2015, 1, 343–347.
13 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Biplab Kanti Mondal, Generation of fleshings at beamhouse in tannery and its environmental impact assessment: Bangladesh perspective. Bangladesh Journal of Scientific and Industrial Research, 2015, 50(3), 227-232.
12 Md. Abul Hashem, Md. Samsul Arefin, Abu Jor, Gaseous air pollutants and its environmental effect emitted from the tanning industry at Hazaribagh, Bangladesh. American Journal of Engineering Research, 2015, 4(5), 138-144.
11 Md. Abdul Motin, Md. Matiar Rahman, M. A. Hafiz Mia, K. M. Salim Reza, M. A. Aziz1, Md. Abul Hashem, Voltammetric Study of Cu(II) in Presence of Aspartic Acid and L-Phenyl Alanine at Different pH Media Analytical & Bioanalytical Electrochemistry, 2015, 7(3), 264-276.
10 Md. Abul Hashem, Kei Toda, Shin-Ichi Ohira Leaching behavior of arsenite and arsenate from the contaminated sediment by the effect of phosphate ion under anaerobic conditions Environmental Earth Sciences, 2015, 74, 737–743.
9 Md. Abul Hashem, Kei Toda, Arsenic leached by step-wise ions addition under aerobic and anaerobic: Speciation by Sequential Hydride Generation Flow Injection Analyzer (SHGFIA). Bangladesh Journal of Scientific and Industrial Research, 2014, 49(3), 195-198.
8 Md. Abul Hashem, Ahidul Islam, Subrata Paul, Shamima Nasrin, Generation of ammonia in deliming operation from Tannery and its environmental effect: Bangladesh perspective. International Journal of Renewable Energy and Environmental Engineering, 2014, 02(04), 266-270.
7 Khan Md. Salim Reza, Md. Abdul Motin, Md. A. Hafiz Mia, Md. Matiar Rahman, Md. Abdul Aziz, Md. Abul Hashem, Redox Behavior of Biologically Important Fe-Catechol Complexes at Different pH Analytical & Bioanalytical Electrochemistry, 2014, 6(6), 763-775.
6 Md. Abul Hashem, Md. Samsul Arefin, Marjjuk Ahmed, Estimation and environmental effect of tannery effluent from wet salted goat skin in beamhouse operations: Bangladesh Perspective. International Journal of Environment, 2014, 4(2), 39-45.
5 Takuma Jodai, Md. Abul Hashem, Shin-Ichi Ohira, Kei Toda, Monitoring of Arsenite and Arsenate by Flow Injection-Hydride Generation Atomic-Fluorescence Spectrometry I: System Development. Journal of Flow Injection Analysis, 2012, 29 (2), 77-80.
4 Takuma Jodai, Md. Abul Hashem, Shin-Ichi Ohira, Kei Toda, Monitoring of Arsenite and Arsenate by Flow Injection-Hydride Generation-Atomic Fluorescence Spectrometry II: Investigation of Leaching from Contaminated Sediments. Journal of Flow Injection Analysis, 2012, 29(2), 81-84.
3 Md. Abul Hashem, Takuma Jodai, Shin-Ichi Ohira, Kazuo Wakuda, Kei Toda, Highly sensitive arsenic analyzer based on liquid-reagent-free hydride generation and chemiluminescence detection for on-site water analysis. Analytical Sciences, 2011, 27, 733-738.
2 Md. Abul Hashem, Mari Takaki, Takuma Jodai, Kei Toda, Measurement of arsenite and arsenate contained in mining river waters and leached from contaminated sediments by sequential hydride generation flow injection analysis. Talanta, 2011, 84, 1336-1341.
1 Kei Toda, Mari Takaki, Md. Abul Hashem, Investigation of arsenic removal in batch wise water treatments by means of sequential hydride generation flow injection analysis. Chemosphere, 2008, 72, 1517-1523.


International Conference

67 Md. Abu Hashem, Sadia Mim, Md. Zillur Rahman Shaikh, Sofia Payel, Md. Shahruk Nur-A-Tomal, Sorption comparison of trivalent chromium on various Ficus carica charcoal from tannery wastewater, Proceedings of the 35th International Congress of IULTCS 2019, June 25-28, 2019, Dresden, Germany.
66 Md. Abul Hashem, Mehedi Hasan, Md. Abdu Momen, Sofia Payel, Minus salt goat skin preservation: Extreme chloride reduction in tannery wastewater, Proceedings of the 35th International Congress of IULTCS 2019, June 25-28, 2019, Dresden, Germany.
65 Md. Abul Hashem, Kallol Paul, Mst. Nazmin Zaman Khan, Mehedi Hasan, Efficiency of Tamarindus indica seed charcoal for chromium removal from tannery wastewater. Proceedings of the 5th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2018), December 23-24, 2018, Khulna, Bangladesh.
64 Nabila Nowrin, Tasnim Alam, Sofia Payel, Md. Shahruk Nur-A-Tomal, Md. Abul Hashem, Efficacy of watermelon (Citrullus lanatus) rind charcoal for chromium removal from tannery wastewater. Proceedings of the 5th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2018), December 23-24, 2018, Khulna, Bangladesh.
63 Sadia Mim, Anika Tabassum, Md. Abul Hashem, Amino acids extraction from hair dissolving liming waste to reduce pollution in tannery. Proceedings of the 5th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2018), December 23-24, 2018, Khulna, Bangladesh.
62 Md. Abul Hashem, Rafiul Alam, Alvi Rownok, Guava bark charcoal adsorbent for chromium removal from tannery disposal site. Proceedings of the 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), 19 –21 December 2018, CUET, Chittagong, Bangladesh.
61 Md. Abul Hashem, Md. Hasibur Rahman Sheikh, Md. Mazharul Islam, Md. Navid. Arman, Sofia, Payel, Calotropis gigentea leaf for goat skin preservation: sustainable chloride reduction in wastewater. Proceedings of the 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), 19–21 December 2018, CUET, Chittagong, Bangladesh.
60 Md. Abul Hashem, Moumita Rani Das, Sofia Payel, Sadia Mim, Chromium adsorption on fat extracted fleshing charcoal from tannery wastewater, Proceedings of the IV International Scientific and Practical Seminar “Innovative Technologies and Materials of Leather and Fur Production” Kyiv, Ukraine, December 5, 2008.
59 Md. Abul Hashem, Md. Aminur Rahman, Mehedi Hasan, Md. Abdul Momen, Urea and muriate of potash effect on arsenic leaching from contaminated sediment under aerobic conditions Proceedings of the International Conference on Chemical Science & Technology (ICCST 2018), 24 February 2018, KUET, Khulna, Bangladesh
58 Md. Abul Hashem, Md. Aminur Rahman, Mehedi Hasan, Md. Abdul Momen, Quazi Farjana Lamia, Chemical fertilizers effect on arsenic leaching from the contaminated sediment under aerobic conditions, Proceedings of the 4th International Conference on Civil Engineering for Sustainable Development (ICCESD 2018), 9~11 February 2018, KUET, Khulna, Bangladesh
57 Sofia Payel, Mrinmoyee Sarkar and Md. Abul Hashem, Banana rachis charcoal to remove chromium from tannery wastewater, Proceedings of the 4th International Conference on Civil Engineering for Sustainable Development (ICCESD 2018), 9~11 February 2018, KUET, Khulna, Bangladesh
56 Md. Navid Arman, Md. Anik Hasan, Md. Abul Hashem, Rafiul Alam, Md. Abdul Momen, Chromium removal from tannery wastewater through electrocoagulation, Proceedings of the 4th International Conference on Civil Engineering for Sustainable Development (ICCESD 2018), 9~11 February 2018, KUET, Khulna, Bangladesh
55 Md. Abul Hashem, Aziza Ahsan, Md. Hasibur Rahman Sheikh, Syeda Anika Bushra, Alvi Rownok, Chromium removal from the tannery wastewater using coir pith charcoal, Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, RUET, Rajshahi, Bangladesh
54 Md. Abul Hashem, Mehedi Hasan, Md. Abdul Momen, Shoeb Rahman, Chromium Removal from the Wastewater Equipped Artocarpus heterophyllus Bark Charcoal, Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, RUET, Rajshahi, Bangladesh
53 Md. Abul Hashem, Md. Abdul Momen, Mehedi Hasan, Aishorjo Paul Bablee, Chromium removal from the tannery wastewater equipped Mangifera indica bark charcoal, Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy 2017 (ICMERE2017) 18–20 December, 2017, Chittagong, Bangladesh
52 Md. Abul Hashem, Mehedi Hasan, Md. Abdul Momen, Alternative short-term preservation of goat skin using Calendula officinalis leaf paste, Proceedings of the ІIІ International Scientific and Practical Seminar “Innovative Technologies and Materials of Leather and Fur Production”, December 7, 2017, Kyiv, Ukraine.
51 Md. Abul Hashem, Md. Aminur Rahman, Md. Abdul Momen, Mehedi Hasan, Heavy metals monitoring in animals blood and meat at slaughterhouse, Khulna, Bangladesh, Proceedings of the ІIІ International Scientific and Practical Seminar “Innovative Technologies and Materials of Leather and Fur Production”, December 7, 2017, Kyiv, Ukraine.
50 Md Mazharul Islam, Md. Kamrul E Millat, Md. Abul Hashem, Md. Hasibur Rahman Sheikh, Sole disengage supple winter indoor footwear, 4th International Leather Engineering Congress, October 19-20, 2017, Izmir, Turkey
49 Md. Hasibur Rahman Sheikh, Muntasir Ibrahim Apon, Md. Abul Hashem, Performance of chromium adsorption on Carica papaya plant biosorbent, 4th International Leather Engineering Congress, October 19-20, 2017, Izmir, Turkey
48 Md. Abul Hashem, Md. Abdul Momen, Mehedi Hasan, Plant base short term preservation of goat skin to reduce pollution load in tannery, 4th International Leather Engineering Congress, October 19-20, 2017, Izmir, Turkey
47 Md. Aminur Rahman, Md. Abul Hashem, Md. Hasibur Rahman Sheikh, Harvested potable rainwater quality of Mongal and Sarankhola upazila at Bagerhat district, Bangladesh, Symposium on Environmental Chemistry for Securing Water Quality, July 30, 2017, Dhaka, Bangladesh
46 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Md. Hasibur Rahman Sheikh, Treatment of high chromium-containing tannery wastewater using Indigenous plant charcoal–An approach to waste management. Proceedings of the 5th International Conference on Solid Waste Management in the Developing Countries, 25-27 February 2017, Khulna, Bangladesh
45 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Md. Hasibur Rahman Sheikh, Syeda Anika Bushra, Bangladesh could produce huge amount of glue from unused goat head skin: Waste to wealth approach. Proceedings of the 5th International Conference on Solid Waste Management in the Developing Countries, 25-27 February 2017, Khulna, Bangladesh
44 Md. Abul Hashem, Rahamatullah, Martin Biswas, Md. Hasibur Rahman Sheikh, Physical properties appraisal of the fabricated composite from fat extracted limed fleshing. Proceedings of the 34th International Congress of IULTCS 2017, February 5-8, 2017, Chennai, India
43 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Nusrat Sharmin, Fabrication of composite from dechromed leather shavings for insole. Proceedings of the 34th International Congress of IULTCS 2017, February 5-8, 2017, Chennai, India
42 Md. Abul Hashem, Md. Abdul Momen, Mehedi Hasan, Md. Shahruk Nur-A-Tomal, Chromium removal from the tannery wastewater using biosorbent. Proceedings of the 34th International Congress of IULTCS 2017, February 5-8, 2017, Chennai, India
41 Md. Abul Hashem, Md. Mazharul Islam, Md. Navid Arman, Md. Hasibur Rahman Sheikh, An eco-friendly short term preservation of goat skin using indigenous plant leaf paste Proceedings of the 34th International Congress of IULTCS 2017, February 5-8, 2017, Chennai, India
40 Md. Abul Hashem , Md. Shahruk Nur-A-Tomal, A novel method to preserve goat skin with indigenous plant extract to reduce salinity in the effluent. Proceedings of the 34th International Congress of IULTCS 2017, February 5-8, 2017, Chennai, India
39 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Aziza Ahsan, Md. Abdul Momen, Mehedi Hasan, Abul Hasan, Md. Hasibur Rahman Sheikh, Sulphide removal from the tannery liming wastewater by coagulation-electrocoagulation. Proceedings of the 34th International Congress of IULTCS 2017, February 5-8, 2017, Chennai, India
38 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Md. Hasibur Rahman Sheikh, Syeda Anika Bushra, Waste to wealth approach: Adhesive from the unused goat head skin. Proceedings of the 34th International Congress of IULTCS 2017, February 5-8, 2017, Chennai, India
37 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Md. Hasibur Rahman Sheikh, Removal of chromium from the tannery wastewater using banana peel charcoal. Proceedings of the International Conference on Engineering Research, Innovation and Education ICERIE 2017, 13 ̶ 15 January, SUST, Sylhet, Bangladesh
36 Bishnu Chandra Barman, Md. Ariful Islam Juel, Md. Abul Hashem, Tannery wastewater treatment using low cost coagulants with simple coagulation-filtration process. 4th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), December 26-27, KUET, Khulna, Bangladesh, 2016.
35 Md. Nymul Hasan, Trenath Paul, Muhammad Naimul Hasan, Md. Abul Hashem, Estimation of VOCs emission from different adhesives used in shoe manufacturing. 4th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), December 26-27, KUET, Khulna, Bangladesh, 2016.
34 Quazi Farjana Lamia, Surojit Mondal, Md. Samsul Arefin, Md. Abul Hashem, Sheep intestine catgut string could be used for footwear material. 4th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), December 26-27, KUET, Khulna, Bangladesh, 2016.
33 Md. Abul Hashem, Md. Abdul Momen, Mehedi Hasan, Abul Hasan, Chromium removal from the tannery wastewater using biosorbent. 4th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), December 26-27, KUET, Khulna, Bangladesh, 2016.
32 Md. Abul Hashem, Mehedi Hasan, Md. Abdul Momen, Eichhornia crassipes charcoal could remove chromium from the tannery wastewater. Proceedings of the ІІ International Scientific and Practical Seminar “Innovative Technologies and Materials of Leather and Fur Production” Kyiv, Ukraine, November 19, 2016.
31 Md. Abul Hashem, md. Shahruk Nur-A-Tomal, Aziza Ahsan, Chromium removal from the tannery wastewater using indigenous adsorbent. 6th International Conference on Advanced Materials Systems (ICAMS), October 20-22, Bucharest, Romania, 2016.
30 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Md. Hasibur Rahman Sheikh, Chromium removal from the tannery wastewater using indigenous plant charcoal. Proceedings of the 1st International Conference on Sustainable Water Processing, 11–14 September 2016, Meliá Sitges, Spain.
29 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Nil Ratan Mondal, Md. Aminur Rahmn, Hair dissolving liming in tanneries enhances heavy metals to environment 16th Asian Chemical Congress, March 16-19, Dhaka, Bangladesh
28 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Syeda Anika Bushra, Treatment of toxic hair burning liming wastewater from tannery by simple coagulation-filtration. 16th Asian Chemical Congress, March 16-19, Dhaka, Bangladesh
27 Md. Abdul Motin, Md. Alim Uddin, M. A. Hafiz Mia, Palash K. Dhar, Md. Abul Hashem, Electrosynthesis and characterization of catechol sulfanilic acid derivatives. 16th Asian Chemical Congress, March 16-19, Dhaka, Bangladesh
26 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal,Aziza Ahsan and Syeda Anika Bushra, Estimation of soluble sulphide discharged in hair burning liming operation from tanneries, Bangladesh. 3rd International Conference on Civil Engineering for Sustainable Development (ICCESD 2016), 12 ‐14 February 2016, Khulna, Bangladesh
25 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Syeda Anika Bushra, Assessment of contaminated soil near Hatirjheel lake at Dhaka city of Bangladesh. 3rd International Conference on Civil Engineering for Sustainable Development (ICCESD 2016), 12 ‐14 February 2016, Khulna, Bangladesh
24 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Extraction of fat from cow hides fleshings of tannery: An approach to produce byproduct. 11th International Conference on Mechanical Engineering, ICME 2015, 18-20 December 2015, Dhaka, Bangladesh
23 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Using the extracted fat from the cow hides fleshings in tannery for soap production. 3rd International Conference on Mechanical Engineering and Renewable Energy 2015 (ICMERE2015) 26-29 November, 2015, Chittagong, Bangladesh
22 Md. Abul Hashem, Nil Ratan Mondal, Md. Shahruk Nur-A-Tomal, Md. Aminur Rahman, Assessment of heavy metals discharging in hair burning liming operation from tanneries, Bangladesh. The 3rd International Conference on Mechanical Engineering and Renewable Energy 2015 (ICMERE2015), 26-29 November, 2015, Chittagong, Bangladesh
21 Shamima Nasrin, Md. Mahadi Hassan, Md. Abul Hashem, Md. Mazharul Islam, Characterization of textile ETP sludge to assess heavy metals and their environmental impact assessment. International Conference on Mechanical, Industrial and Materials Engineering 2015 ICMIME 2015), 11-13 December, 2015, RUET, Rajshahi, Bangladesh
20 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, One step to prepare fatliquor from the extracted fat of cowhide fleshings for using in leather. Processing of XXXIII IULTCS Congress November, 24th–27th, 2015 Novo Hamburgo, Brazil
19 Md. Samsul Arefin, Nil Ratan Mondal, Md.Minar Ahmed, Md. Abul Hashem, An emerging approach in Footwear Industry to introduce Finite Element Analysis Method for Physical Properties of the Outsole 3rd International Conference on Mechanical Engineering and Renewable Energy 2015 (ICMERE2015) 26–29 November 2015, Chittagong, Bangladesh
18 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Fabrication of Composite from Buffing Dust for using in Footwear and Leather Products Industry 3rd International Leather Engineering Congress, May 21-22, 2015, Izmir, Turkey
17 Khan Md. Salim Reza, Md. Hafiz Mia, Md. Abdul Aziz, Md. Abul Motin, Md. Matiar Rahman, Md. Abul Hashem, Electrochemical behavior of Iron (III) complexes with Catechol at different pH World Academy of Science, Engineering and Technology, International Science Index, Chemical and Molecular Engineering, 2, 01, 19175, 2015, International Conference on Chemical Industry and Science (WASET) Jeddah, Saudi Arabia, January 26-27, 2015.
16 Md. Abdul Motin, Md. Abdul Aziz, Md. Hafiz Mia, Md. Abul Hashem, Electro-oxidation of Catechol in the presence of Nicotinamide at different pH World Academy of Science, Engineering and Technology, International Science Index, Chemical and Molecular Engineering, International Conference on Chemical Industry and Science (WASET) Jeddah, Saudi Arabia, January 26-27, 2015.
15 Md. Abdul Motin, Md. Abdul Aziz, Md. Hafiz Mia, Md. Rabiul Islam, Khan Md. Salim Reza, Md. Abul Hashem, Electrochemical Study of Catechol in the Presence of Nicotinamide at Different pH Media. International Conference on Materials Chemistry (ICMC 2014), December 6-8, 2014, SUST, Sylhet, Bangladesh
14 Md. Matiar Rahman, Md. Hafiz Mia, Khan Md. Salim Reza, Md. Abdul Aziz, Md. Abdul Motin, Md. Abul Hashem, Voltammetric Study of Cu(II) with Aspatic Acid and L-phenyl Alanine. International Conference on Materials Chemistry (ICMC 2014), December 6-8, 2014, SUST, Sylhet, Bangladesh.
13 Khan Md. Salim Reza, Md. Hafiz Mia, Md. Abdul Motin, Md. Abdul Aziz, Md. Matiar Raham, Md. Abul Hashem, Redox Interaction of Biologically Important Iron (III) in Presence Catechol. International Conference on Materials Chemistry (ICMC 2014), December 6-8, 2014, SUST, Sylhet, Bangladesh.
12 Md. Hafiz Mia, Md. Abdul Aziz, Md. Abdul Motin, Khan Md. Salim Reza, Md. Abul Hashem, Investigation of electro-oxidation of Catechol in the Presence of Diethylamine at Different pH. International Conference on Materials Chemistry (ICMC 2014), December 6-8, 2014, SUST, Sylhet, Bangladesh.
11 Md. Abdul Zalil, Md. Abul Hashem, Abu Jor, Aquatic effluence triggered by tannery during beam house and chrome tanning operations. Proceedings of 3rd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), December 26-27, KUET, Khulna, Bangladesh, 2014.
10 Md. Abul Hashem, Ahidul Islam, Shakila Mohsin, Biplab Kanti Mondal, Discharging of toxic chromium after wet-blue production from tannery at Hazaribagh, Bangladesh causing serious pollution. 2nd International Conference on Advances in Civil Engineering, December 26-28, CUET, Chittagong, Bangladesh, 2014.
9 Md. Abul Hashem, Shakila Mohsin, Ahidul Islam, Pollution vs. Regulations-Screening of physical and chemical parameters near real time in tannery at beamhouse, Hazaribagh, Bangladesh. 2nd International Conference on Advances in Civil Engineering, December 26-28, CUET, Chittagong, Bangladesh, 2014.
8 Md. Abul Hashem, Md. Shahruk Nur-A-Tomal, Biplab Kanti Mondal, Solid waste generation during fleshing operation from tannery and its environmental impact: Bangladesh perspective. Proceedings of 2nd International Conference on Advances in Civil Engineering, December 26-28, CUET, Chittagong, Bangladesh, 2014.
7 Md. Abul Hashem, Ahidul Islam, Subrata Paul, Shamima Nasrin, Emission of gaseous ammonia during deliming operation in tannery and its environmental effect: Bangladesh. 2nd International Conference on Civil Engineering for Sustainable Development, February 14-16, 2014, KUET, Khulna, Bangladesh, 25.
6 Md. Abul Hahsem, Marjjuk Ahmed, Md. Samsul Arefin, Estimation of solid and liquid wastes generated from the beam house operations from the wet salted goat skin. 2nd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), February 1-2, 2013, KUET, Khulna, Bangladesh.
5 Md. Ahasan Habib, Md. Abul Hashem, A. K. M. Masud, High Quality Yarn Production using QFD: Bangladesh Perspective. 2nd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), February 1-2, 2013, KUET, Khulna, Bangladesh.
4 Takuma Jodai, Md. Abul Hashem, Shin-Ichi Ohira, Kei Toda, Hydride atomic fluorescence detection by continuous flow analysis of soil arsenic leaching process kinetic analysis. 60th Annual Meeting of the Japan Society for Analytical Chemistry, Nagoya, Japan, 2011.
3 Takuma Jodai, Md. Abul Hashem, Shin-Ichi Ohira, Kei Toda, Kinetic analysis of arsenic leaching from polluted sediments. 5th International Conference on Advanced Science and Technology (ICAST), Kumamoto, Japan, 2010.
2 Md. Abul Hashem, Mari Takaki, Kei Toda, Investigation of arsenic leaching from the contaminated sediments by an automated sequential flow injection analysis: simultaneously monitored arsenite and arsenate. 16th International Conference on Flow Injection Analysis, Pattaya, Thailand, 2010.
1 Md. Abul Hashem, Kei Toda, Investigation of arsenic leaching from the contaminated sediments by an automated flow analysis coupled with sequential hydride generation. 57th Annual Meeting of the Japan Society for Analytical Chemistry, Fukuoka, Japan, 2008.


Last Update: 15 Jul 2019