Somnath Somadder
Assistant Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET)
Khulna -9203, Bangladesh. Phone: +880-41-769468~75, Ext-8407
Cell: 01752292813,
Website : www.kuet.ac.bd/me/somnath/
Thank you for visiting the web page of Somnath Somadder. He is currently working as Assistant Professor in the Department of Mechanical Engineering and Assistant Provost in Amar Ekushey Hall in Khulna University of Engineering & Technology. He has received his Bachelor's degree, B.Sc.(ME) in 2018 and a Master's degree, M.Sc. (ME) from KUET in 2021. He is now working on the Bimetallic joint, Stress singularity, Contact stress, Structural analysis. web counter

Educational Records

M.Sc. in Mechanical Engineering
Khulna University of Engineering & Technology, Bangladesh. (2018-2021)
Student Type: Part Time, Result: Awarded,
Thesis Title: Effect of Adhesive Layer Thickness and Slant Angle on Piezoelectric Bonded Joints
 
S.S.C (Secondary School Certificate)
Barisal Zilla School, Barisal, Bangladesh. -2011)
Group: Science, Student Type: Regular, Result: A+, CGPA: 5.00, CGPA Scale: 5.00,
 
H.S.C (Higher Secondary Certificate)
Govt. Syed Hatem Ali College, Barisal, Bangladesh. -2013)
Group: Science, Student Type: Regular, Result: A+, CGPA: 5.00, CGPA Scale: 5.00,
Achievement: Board Scholarship
 
B.Sc. in Mechanical Engineering
Khulna University of Engineering & Technology, Bangladesh. -2018)
Department: Mechanical Engineering, Student Type: Regular, Merit Position: 2nd ,
Marks: 91.80%, CGPA: 3.91, CGPA Scale: 4.00,
Achievement: Honors
 
PhD in Mechanical Engineering
Florida International University, USA. Student Type: Full Time,
Achievement: Presidential Doctoral Fellow
 

Scholarship/Award Received

Deans Award
26-Feb-2018
Four Deans Awards for securing CGPA of 3.75 or above in each session
Honors
26-Feb-2018
The honors is given to the students having CGPA 3.75 or above.
Education Board Scholarship (Barisal Board)
Talent Pool Scholarship in class five, General Grade Scholarship in class eight and in HSC exam.

Service Record

Khulna University of Engineering & Technology (KUET)
From 1-Feb-2022 to Present
OrganizationType: Univeristy
Position: Assistant Professor
Department/Section: Department of Mechanical Engineering
Responsibility: Teaching, Paper Setter, Examiner and Research
Khulna University of Engineering & Technology (KUET)
From 1-Aug-2018 to 31-Jan-2022
OrganizationType: Univeristy
Position: Lecturer
Department/Section: Department of Mechanical Engineering
Responsibility: Teaching, Paper Setter, Examiner and Research
Khulna University of Engineering & Technology (KUET)
From 31-Jul-2018 to Present
OrganizationType: Univeristy
Position: Consultancy, Research & Testing Officer
Department/Section: CRTS, Department of Mechanical Engineering
Responsibility: Consultancy, research and performing various test.

Administrative Experience Record

KUET
From 1-Sep-2021 to Present
OrganizationType: Univeristy
Position: Assistant Provost
Department/Section: Amar Ekushey Hall
Working Area: Amar Ekushey Hall
Responsibility: To look after the students within the framework of University Rules and Regulations.

Professional Body Membership

Institution of Engineers, Bangladesh
Member Type: Associate Member
Member ID: A-24667

Research

Additive Manufacturing
Additive Manufacturing (AM) is defined as ―the process of joining materials to make objects from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing methodologies, such as traditional machining.
Multiscale Modeling
Multiscale modeling refers to a style of modeling in which multiple models at different scales are used simultaneously to describe a system. The different models usually focus on different scales of resolution.Multiscale modeling research focusses on developing comprehensive multiphysics framework, bridging length scales from atomistic to the structural scale, including geometric and material variability, and damage for accurate prediction of material behavior and failure under service conditions for a wide range of materials such as polymer matrix composites (PMC), ceramic matrix composites (CMC), metallic alloys and superalloys.
Numerical analysis of functionally graded materials
A functionally graded material (FGM) is a two-component composite characterised by a compositional gradient from one component to the other. In contrast, traditional composites are homogeneous mixtures, and they therefore involve a compromise between the desirable properties of the component materials.
Impact Dynamics
Low velocity impact on composite materials
Solid Mechanics and Materials Enginerring
Analysis of stress singularity fields in 3D transversely isotropic piezoelectric and elastic bonded joints by finite element method.

National/International Journal

(Selected Papers)

7 Digonta Chanda, Dr. Md. Ashraful Islam, Dr. Md. Abdul Hasib, Somnath Somadder, "NUMERICAL MODELING OF LOW-VELOCITY IMPACT ON COMPOSITE LAMINATES", MIST International Journal of Science and Technology, 2022
Comments: Under Review
6 Palash Das, Md. Ashraful Islam, Somnath Somadder, and Md. Abdul Hasib, "Analytical and numerical solutions of pressurized thick-walled FGM spheres", Archive of Applied Mechanics, Springer, 2023
https://doi.org/10.1007/s00419-023-02406-3
5 Somnath Somadder , Palash Das , Md. Ashraful Islam, "CHARACTERISTICS OF STRESS DISTRIBUTION OF A MULTI LAYERED CYLINDRICAL PRESSURE VESSEL ", Journal of Mechanical and Energy Engineering, Koszalin University of Technology, pp. 1-6, 2023
DOI: 10.30464/jmee.00305
4 Somnath Somadder , Palash Das , Md. Ashraful Islam, Md. Abdul Hasib, "Numerical Investigation of Interfacial Stress Distribution in Adhesive-Bonded Joints for Different Adhesive Materials ", International Journal of Engineering & Applied Sciences (IJEAS), Akdeniz University, vol. 14, issue 2, 2022
https://doi.org/10.24107/ijeas.1117544
3 Palash Das, Md. Ashraful Islam, Somnath Somadder, and Md. Abdul Hasib, "Analytical and numerical analysis of functionally graded (FGM) axisymmetric cylinders under thermo-mechanical loadings", Materials Today Communications, ELSEVIER, vol. 33, 2022
2 Somnath Somadder, Md. Shahidul Islam, "Effect of Adhesive Layer Thickness and Slant Angle on Piezoelectric Bonded Joints", Journal of Mechanical Engineering, Universiti Teknologi MARA, Shah Alam, Malaysia, vol. 19, issue 2, pp. 251-268, 2022
1 Somnath Somadder, Md. Shahidul Islam, "“Stress Analysis of a Thick Walled Orthotropic Bonded Cylinder under Pressure and Temperature by Using FEM”, ", International Journal of Mechatronics and Manufacturing Technology, vol. 3, issue 1, pp. 1-28, 2018


National/International Conference

(Selected Papers)

3 Rahul Sarker, Md. Shahidul Islam, and Somnath Somadder, "Numerical Investigation of Stress Field Near the Vertex of a 3D Three Layer Piezoelectric Bonded Joint", International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2022), 2022
2 Somnath Somaader, Md. Shahidul Islam, "Effect of Slant Angle on Piezoelectric Bonded Joint", 6th International Conference on Mechanical Industrial & Energy Engineering, Khulna, Bangladesh, 2020
1 Somnath Somadder, Md. Shahidul Islam, "“Stress Analysis of a Cylinder Subjected to Thermo-mechanical Loads by Using FEM”", 4th International Conference on STRUCTURE, PROCESSING AND PROPERTIES OF MATERIALS 2018, Bangladesh,


Course Conduction


1.Kinematics and Dynamics of Machinery

  Department: Energy Science and Engineering

  Batch: 2K16

  Course No.: ME 2213

  Credit: 3.0

  Status: Finished

 

 

2.Sessional ME 2213

  Department: Energy Science and Engineering

  Batch: 2K16

  Course No.: ME 2214

  Credit: 0.75

  Status: Finished

 

 

3.Machine Design I

  Department: Mechanical Engineering

  Batch: 2K16

  Course No.: ME 3117

  Credit: 3.0

  Status: Finished

 

 

4.Sessional on ME 3117

  Department: Mechanical Engineering

  Batch: 2K16

  Course No.: ME 3118

  Credit: 3.0

  Status: Finished

 

 

5.Fluid Mechanics

  Department: Energy Science and Engineering

  Batch: 2K17

  Course No.: ME 2115

  Credit: 3.0

  Status: Finished

 

 

6.Sessional on ME 4113

  Department: Mechanical Engineering

  Batch: 2K15

  Course No.: ME-4114

  Credit: 0.75

  Status: Finished

 

 

7.Machine Shop

  Department: Chemical Engineering

  Batch: 2K18

  Course No.: MES 1130

  Credit: 1.50

  Status: Finished

 

 

8.Machine Shop

  Department: Materials Science and Engineering

  Batch: 2K17

  Course No.: MES 2110

  Credit: 0.75

  Status: Finished

 

 

 

9.Kinematics and Dynamics of Machinery

  Department: Energy Science and Engineering

  Batch: 2K17

  Course No.: ME 2213

  Credit: 3.0

  Status: Finished

 

10.Sessional ME 2213

   Department: Energy Science and Engineering

   Batch: 2K17

   Course No.: ME 2214

   Credit: 0.75

   Status: Finished

 

 

11.Manufacturing Process

   Department: Mechatronics Engineering

   Batch: 2K18

   Course No.: ME 1231

   Credit: 3.00

   Status: Finished

 

 

12.Sessional on Manufacturing Process

   Department: Mechatronics Engineering

   Batch: 2K18

   Course No.: ME 1232

   Credit: 1.50

   Status: Finished

 

13.Sessional on Basic Mechanical Engineering

   Department: Electrical Engineering

   Batch: 2K18

   Course No.: ME 1204

   Credit: 0.75

   Status: Finished

 

 

14.Machine Design I

   Department: Mechanical Engineering

   Batch: 2K17

   Course No.: ME 3117

   Credit: 3.0

   Status: Finished


15.Sessional on ME 3117

  Department: Mechanical Engineering

  Batch: 2K17

  Course No.: ME 3118

  Credit: 3.0

  Status: Finished


16.Engineering Mechanics

   Department: Mechtronics Engineering

   Batch: 2K18

   Course No.: ME 2131

   Credit: 3.0

   Status: Finished

 

 

17.Mechanical Equipment in Building

   Department: Architecture

   Batch: 2K17

   Course No.: ME 3125

   Credit: 3.0

   Status: Finished

 

 

18.Engineering drawing and design

   Department: Biomedical Engineering

   Batch: 2K19

   Course No.: ME 1116

   Credit: 1.50

   Status: Finished

 

 

19.Simulation

   Department: Mechanical Engineering

   Batch: 2K16

   Course No.: ME 4122

   Credit: 0.75

   Status: Finished

 

 

20.Workshop practice

   Department: Textile Engineering

   Batch: 2K18

   Course No.: MES 2120

   Credit: 1.50

   Status: Finished

 

 

21.Engineering Graphics

   Department: Chemical Engineering

   Batch: 2K18

   Course No.: ME 2130

   Credit: 1.50

   Status: Finished


22.Machine Design II

   Department: Mechanical Engineering

   Batch: 2K17

   Course No.: ME 3217

   Credit: 3.00

   Status: Finished

 

23.Sessional on ME 3217

    Department: Mechanical Engineering

    Batch: 2K17

    Course No.: ME 3218

    Credit: 0.75

    Status: Finished

 

 

24.Solid Mechanics and Machine Design

    Department: Textile Engineering

    Batch: 2K18

    Course No.: ME 2221

    Credit: 3.00

    Status: Finished

 

 

25.Sessional on ME 2221

    Department: Textile Engineering

    Batch: 2K18

    Course No.: ME 2222

    Credit: 3.00

    Status: Finished.



26.Fatigue, Creep & Fracture

    Department: Mechanical Engineering

    Batch: Post Graduate (January 2022)

    Course No.: ME 6311

    Credit: 3.00

    Status: Running


27.Machine Design I

   Department: Mechanical Engineering

   Batch: 2K18

   Course No.: ME 3117

   Credit: 3.0

   Status: Finished


28.Sessional on ME 3117

  Department: Mechanical Engineering

  Batch: 2K18

  Course No.: ME 3118

  Credit: 3.0

  Status: Finished


29.Simulation

   Department: Mechanical Engineering

   Batch: 2K16

   Course No.: ME 4122

   Credit: 0.75

   Status: Finished



30.Engineering Mechanics

   Department: Mechatronics Engineering

   Batch: 2K19

   Course No.: ME 2131

   Credit: 3.0

   Status: Finished



Supervision


Supervisor of (fourth year) thesis student 1. 1705002 2. 1705081 Supervisor of (third year) project student 1. 1805053 2. 1805094

Student Corner

ME 2113 (Statics_MTE)

Friction




ME 4122
Simulation


 
Last Update: 31 Mar 2023