Dr. Khandkar Aftab Hossain
Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET)
Khulna -9203, Bangladesh. Phone: Res. +88 041 732314, Off. +88 041 769471 Ext 409
Cell: +88 01714087345, Fax: +88 041 774900, Mail : draftabkuet@gmail.com
Website : www.kuet.ac.bd/me/aftab/

Books

Hossain, K. A, Fluid Mechanics and Machineries which is selected as text book for Bangladesh Technical Education Board, Dhaka ., Bangladesh Technical Education Board, 1999

International Journal

4 M.I. Haque and K.A. Hossain, "Free Convection Heat Transfer from Heated Object in a Container", ISESCO Science and Technology Vision, vol. 7, issue No. 11, pp. 64-70, May, 2011
3 M. R. Asif, M. S. Hossain and K. A. Hossain, "Heat Transfer in a Rectangular Enclosure with Baffles.", ARPN Journal of Engineering and Applied Sciences, vol. 6, issue No. 4, pp. 29-41, April, 2011
2 Shamima Akter and Khandkar Aftab Hossain, "Flow Characteristics of Round Air Jet over a Rectangular Cavity.", ISESCO Science and Technology Vision, vol. 6, issue No. 9, pp. 70-74, May, 2010
1 M. M. Kamal Uddin, M. Shahidul Islam and Khandkar Aftab Hossain, "Effect of Reynolds Numbers on Fluid Flow and Heat Transfer Characteristic Over a Rectangular Prism in Uniform Flow", ISESCO Science and Technology Vision, vol. 5, issue No. 8, pp. 35-39, November, 2009


International Conference

26 Ahsan Ferdous, Minhaz Hossain and Khandkar Aftab Hossain., "Effect of Location of Cambered Spoiler on Aerodynamic Characteristics of a Car”, ", International Conference on Mechanical, Industrial and Energy Engineering 2014,, Khulna, BANGLADESH., 26-27 December, 2014,
25 Sabbir Mohammad Muntasir, Md Zulfi Ibney Zahed and Khandkar Aftab Hossain, “Numerical Study on Heat Transfer Characteristics with Square Heated Object in an Enclosure.”, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2013 (ICMERE2013) 1-3 May 2014, Chittagong, Bangladesh.
24 Abdullah Al Anam, Khandakar Rasel Kabir and Khandkar Aftab Hossain., “Heat Transfer Characteristics in an Enclosure with a Thin Heated Plate at the Bottom”, International Conference on Mechanical, Industrial and Energy Engineering 2010, 23-24 December, 2010, Khulna, BANGLADESH.
23 Md. Alaudddin, Md. Abdul Hasib, Md. Kamrul Islam and Khandkar Aftab Hossain.,”Mixed Convective Heat Transfer from a Heated Object in an Enclosure”, International Conference on Mechanical, Industrial and Energy Engineering 2010, 23-24 December, 2010, Khulna, BANGLADESH.
22 Mausumi Ferdous, Afrin Parvez and Khandkar Aftab Hossain,” Heat Transfer from a Head Light Filament”, International Conference on Mechanical, Industrial and Energy Engineering 2010, 23-24 December, 2010, Khulna, BANGLADESH.
21 Md. Shariful Islam and Khandkar Aftab Hossain,” Heat Transfer Characteristics of Rectangular Blocks in a Channel”, International Conference on Mechanical, Industrial and Energy Engineering 2010, 23-24 December, 2010, Khulna, BANGLADESH.
20 Shahriar, M. H, Hasan, M. N, Uddin, M. N, and Hossain, K. A., “Heat Transfer Characteristics for Plane Wall Jet with Rib”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh.
19 Hossain, M.S., Asif, M.R. and Hossain, K.A.,” Convective Heat Transfer in an Enclosure with Baffle”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh.
18 Kabir, M.S., Rezwan, M.S., Mahmud, M.S. and Hossain, K.A., “Heat transfer Characteristics in an Enclosure with Vertical Baffles”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh.
17 Alaudddin,M., Islam,M.K., Hasib, M.A. and Hossain, K.A. “Heat Transfer Characteristics in an Enclosure with Heated Object at the Side Wall”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh.
16 M. S. Hossain, M. R. Asif and K. A. Hossain, “Mixed Convective Heat Transfer in a Vertical Enclosure with Baffle”, Proceedings of the Conference on Engineering Research, Innovation and Education 2010 CERIE 2010, 11-13 January, Sylhet, Bangladesh.
15 Haque, M. I. and Hossain, K. A.,”Convective Heat Transfer From Heated Object in a Square Enclosure”, Proceedings of the 8th. International Conference on Mechanical Engineering 2009 (ICME2009) 26-28 December 2009, Dhaka, Banglades
14 Abdul Latif Khan, Zahir Uddin Ahmed and Khandkar Aftab Hossain, “ Fluid Flow Characteristics Between Two Stationary Flat Plates With Baffles”, Proc. Of the 11 th Annual Paper Meet, 25-26 December, 2006, Mechanical Engineering Division, IEB, Dhaka, pp/24-29.
13 M. M. Kamal Uddin, M. Shahidul Islam and Khandkar Aftab Hossain, “ Effect of Reynolds Numbers on Fluid Flow and Heat Transfer Characteristic Over a Rectangular Prism in Uniform Flow”, Proc. of the 11 th Annual Paper Meet, 25-26 December, 2006, Mechanical Engineering Division, IEB, Dhaka, pp/7-12.
12 Kader, M.G. and Hossain, K. A. “Effect of Surface Roughness on Fluid Flow and Heat Transfer Characteristics due to Wall Jet”, Proc. of 2nd. International Energy Conversion Engineering Conference, 16-19 August 2004, Providence, Rhode Island, USA.
11 S.M. Asadul Hossain , MD. Ariful Haque Fakir and Khandakar Aftab Hossain, “Static Pressure Distribution Over A Wedge Surface In Uniform Flow.”, Proc. Of Sixth Annual Paper Meet APM’99 of the Mechanical Engineering Division, IEB, Dhaka Center, Paper No.32, pp/248-252, 18-20 February, 2000, Dhaka, Bangladesh.
10 Md. Morshed Alam , Polash Das Gupta and Khandkar Aftab Hossain, “Heat Transfer Characteristics of A Sphere In Uniform Flow”, Proc. Of Sixth Annual Paper Meet APM’99 of the Mechanical Engineering Division, IEB, Dhaka Center, Paper No.1, pp/1-5, 18-20 February, 2000, Dhaka, Bangladesh.
9 Khandkar A. Hossain and Ramesh C. Arora.”Impingement Heat Transfer Due to Laminar Offset Slot Jet”, 36th. Aerospace Sciences Meeting & Exhibit, Paper# 98-0364, January 12-15, 1998, Reno, NV, USA.
8 Hossain,K.A. “ Energy From Wind a Numerical Approach ”, Proc. Of A National Seminar on Utilization of Renewable and Alternative Energy Sources for Sustainable Development, pp/101-116 , 10-11, March, 1998.
7 Khandkar Aftab Hossaiin and Ramesh Chandra Arora, “ Numerical Modeling of Laminar Free Slot Jet ”, Proc. of 24th. National Conference on Fluid Mechanics and Fluid Power, Shibpur, INDIA, 26-28, pp/ B-42 to B-47, December, 1997.
6 Hossain, K.A. and Arora, R.C., “Numerical Modeling of Laminar Free Axisymmetric Jet”, Proc. Of Second International Seminar on Fluid Mechanics and Heat Transfer (ISFMHT-97), pp. 76-84, December 17-18,1997.
5 Hossain, K. A. and Islam, M.Q., “Yaw Stability of a Horizontal Axis Downwind Turbine”, Proc. Of National Seminar on Renewable Energy for Proverty Alleviation (NSREPA ’97) , Organized by Dhaka Centre, Institution of Engineers, Bangladesh, pp 198-206, 28-30 October, 1997.
4 Ahsan Reza Choudhuri, Khandkar Aftab Hossain and Md. Nawsher Ali , “Hybrid Fuel for Supersonic Combustion Ram (SCRAM) Jet Combustion,” Proc. Of Fourth Annual Paper Meet APM’97 of the Mechanical Engineering Division, IEB, Paper No. 32, pp 262-265, 23-25 October, 1997, Bangladesh.
3 Hossain, K.A. and Arora, R.C. “ Flow Characteristics of Laminar Slot Jet Impinging Over a Cylinder”, Proc. of Fourth Annual Paper Meet APM’97 of the Mechanical Engineering Division, IEB, Paper No. 6, pp 51-59, 23-25 October, 1997, Bangladesh.
2 Arora, R.C. and Hossain, K. A., “ Heat Transfer Characteristics of a Heated Laminar Offset Slot Jet ”, Proc. of third ISHMT-ASME Heat and Mass Transfer Conference and Fourteenth HMTC national Heat and Mass Transfer conference, December, 29 – 31, pp/667-672, 1997, IIT, Kanpur, INDIA.
1 Hossain, K.A. and Arora, R.C, “Laminar Heated Slot Jet Impinging On a Flat Plate Including Buoyancy Effects ”, Proc. of Seminar on Fluid Mechanics Research, December 27-28, pp 155-164, 1995, Dhaka, Bangladesh.


National Journal

1 Md. Golam Kader and Khandkar Aftab Hossain, "Free Convective Heat Transfer From an Object at Low Rayleigh Number", Journal of Mechanical Engineering,Transaction of the Mech. Eng. Div., The Institution of Engineers, Bangladesh, vol. ME 43, issue No. 1, pp. 23-28, June, 2013


Last Update: 19 May 2015