Md. Anik Hasan
Assistant Professor
Department of Leather Engineering
Khulna University of Engineering & Technology (KUET)
Khulna -9203, Bangladesh.
Cell: 01738502986, Mail : [email protected] ;[email protected]
Website : www.kuet.ac.bd/le/anikhasan/

Welcome to my departmental home page. Md. Anik Hasan was born in Madaripur,Bangladesh. After completing SSC from shibchar Nandakumar institution in 2010, he pursued his HSC from Tejgaon College, Dhaka in 2012. He completed his Bachelor of Science (B.Sc.) in Leather Engineering from Khulna University of Engineering & Technology (KUET) in May 2017. He was appointed as Lecturer in the department of Leather Engineering in Khulna University of Engineering & Technology (KUET)in January 2018. Currently, he has been working as an Assistant Professor in the same department since May 2021. Please feel free to contact me via the mentioned email address. I'd be happy to be of any assistance required. Good day!

Educational Records

Secondary School Certificate (SSC)
Shibchar Nanda kumar Instution, Dhaka, Bangladesh. -2010)
Group: Science, Student Type: Regular, Result: A+, CGPA: 5.00, CGPA Scale: 5.00,
 
Higher Secondary Certificate (HSC)
Tejgaon College, Dhaka, Bangladesh. -2012)
Group: Science, Student Type: Regular, Result: A+, CGPA: 5.00, CGPA Scale: 5.00,
 
Bachelor of Science in Leather Engineering
Khulna University of Engineering & Technology, Bangladesh. -2017)
Department: Leather Engineering, Student Type: Regular, Merit Position: 1st ,
Marks: 83.80%, CGPA: 3.81, CGPA Scale: 4.00,
Achievement: Three Times Deans Award; Got University Gold Medal
 
Master of Science in Leather Engineering
Khulna University of Engineering & Technology, Bangladesh. -2022)
Student Type: Part time, Result: 3.75, CGPA Scale: 4.00,
 


Scholarship/Award Received

Technical scholarship at undergraduate level
Achieved four years consecutive scholarship from KUET which was based on achademic result (For the session 2012-2013 2013-2014 2014-2015 2015-2016)
Deans Award
Achieved three years consecutive Deans Award from Faculty of Mechanical Engineering, KUET which was based on CGPA greater than 3.75 out of 4.00 in a year
University Gold Medal Award
Achieved University Gold Medal in Recognition of Securing the 1st Position and Highest marks/CGPA in Bachelor of Science in Leather Engineering Examination from the Department of Leather Engineering, KUET
Vice-Chancellor Award
For outstanding performance and contribution to research which is mainly assessed based on "High-Impacr Research Publication" .


Service Record

Khulna University of Engineering & Technology (KUET)
From 2-May-2021 to Present
OrganizationType: Educational Institution (University)
Location: Khulna, Bangladesh
Position: Assistant Professor
Department/Section: Leather Engineering
Working Area: Teaching
Status: Active
Responsibility: Conducting assigned undergraduate courses, academic adviser to students, served dept. committees, supervised undergraduate thesis, supervised laboratories, Conducting administrative work etc.
Khulna University of Engineering & Technology (KUET)
From 1-Jan-2018 to 1-May-2021
OrganizationType: Educational Institution (University)
Location: Khulna, Bangladesh
Position: Lecturer
Department/Section: Leather Engineering
Working Area: Teaching
Status: Active
Responsibility: Conducting assigned undergraduate courses, academic adviser to students, served dept. committees, supervised undergraduate thesis, supervised laboratories, Conducting administrative work etc.

Administrative Experience Record

Khulna University of Engineering & Technology (KUET)
From 2-Nov-2020 to 2-Nov-2022
OrganizationType: Educational Institution (University)
Location: Khulna, Bangladesh
Position: Assistant Provost
Department/Section: Amar Ekushey Hall
Responsibility: Administrative Works in Hall


Research

Industrial and Environmental cleaner technologies, Solid waste management, Wastewater treatment, Heavy metal analysis, Sustainable leather manufacturing


National/International Journal

(Selected Papers)

12 Md. Abul Hashem, Mehedi Hasan, Md. Anik Hasan, Md. Sahariar Sahen, Sofia Payel, Al Mizan, Md. Shahruk Nur-A-Tomal (2023) Composting of limed fleshings generated in a tannery: Sustainable waste management, Environmental Science and Pollution Research, https://doi.org/10.1007/s11356-022-25070-6
11 Md. Shohag Milu, Md. Abul Hashem, Sofia Payel, Md. Anik Hasan (2022) Leather buffing dust in brick production: Solid waste management in tanneries. Case Studies in Construction Materials, Vol. 17, e01625. https://doi.org/10.1016/j.cscm.2022.e01625
10 Md. Abul Hashem, Sofia Payel, Sadia Mim, Md. Anik Hasan, Md. Shahruk Nur-A-Tomal, Md. Aminur Rahman, Majher I. Sarker (2022) Chromium adsorption on surface activated biochar made from tannery liming sludge: A waste-to-wealth approach. Water Science and Engineering. https://doi.org/10.1016/j.wse.2022.09.001
9 Md. Abul Hashem, Md. Anik Hasan, Md. Abdul Momen, Sofia Payel, Mehedi Hasan, Md. Zillur Rahaman Shaikh (2022) Bio-intervention phyto-based material for raw goatskin preservation: A cleaner-sustainable approach, Environmental Science and Pollution Research, doi:10.1007/s11356-022-18544-0
8 Md. Anik Hasan, Md. Abul Hashem, Sofia Payel (2022) Stabilization of liming sludge in brick production: A way to reduce pollution in tannery, Construction and Building Materials, https://doi.org/10.1016/j.conbuildmat.2021.125702
7 Sofia Payel, Md. Abul Hashem, Md. Anik Hasan (2021) Recycling biochar derived from tannery liming sludge for chromium adsorption in static and dynamic conditions, Environmental Technology & Innovation, https://doi.org/10.1016/j.eti.2021.102010
6 Md. Abul Hashem, Mst. Nazmin Zaman Khan, Protima Roy, Md. Anik Hasan (2021) Effect of oxidizers on sulphide removal from hair dissolving liming wastewater in tannery. Journal of Engineering Science 12(3), 2021, 67-72. doi: https://doi.org/10.3329/jes.v12i3.57480
5 Md. Abul Hashem, Md. Anik Hasan, Abul Hossain Nayan, Sofia Payel, Mehedi Hasan, Md. Sahariar Sahen (2021) The environmental impacts of heavy metals in soil, certain plants and wastewater near industrial area of Brahmanbaria, Bangladesh, Environmental Monitoring and Assessment, https://doi.org/10.1007/s10661-021-09497-x
4 Md. Abul Hashem, Md. Hasibur Rahman Sheikh, Rahamatullah, Martin Biswas, Md. Anik Hasan, Sofia Payel (2021) Composite fabrication from fat extracted limed fleshing: Solid waste management in tannery, Bangladesh, Journal of Scientific and Industrial Research, https://doi.org/10.3329/bjsir.v56i3.55969
3 Md. Ariful Islam Juel, Md. Anik Hasan, Al-Mizan, Md. Abul Hashem (2021) Metals removal from thermally treated tannery sludge: A novel approach, Environmental Nanotechnology, Monitoring & Management. https://doi.org/10.1016/j.enmm.2021.100548
2 Md. Abul Hashem, Md. Anik Hasan, Md. Mazharul Islam, Md. Navid Arman, Md. Hasibur Rahman Sheikh (2021) Ficus hispida leaf paste for goatskin preservation: Pollution reduction in tannery wastewater, Environmental Progress & Sustainable Energy, https://doi.org/10.1002/ep.13662
1 Md. Anik Hasan, Md. Abul Hashem, Md. Navid Arman, Md. Abdul Momen, Batch electrocoagulation process for removal of chromium from tannery wastewater, Journal of Engineering Science, https://doi.org/10.3329/jes.v12i1.53098


National/International Conference

(Selected Papers)

10 Protima Roy, Modinatul Maoya, Md. Abul Hashem, Tasmia Nourin Pollen, Md. Anik Hasan (2022) Investigation of Chloride Removal from Soaking Wastewater by Using Natural Biomass, Proceedings of 7th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2022), 22-24 December, 2022, Khulna, Bangladesh.
9 Abul Hossain Nayan, Md. Abdullah Al Sayeed, Md. Abul Hashem, Sangida Iqbal, Md. Anik Hasan (2022) Short Term Preservation of Goatskin with Antioxidant Containing Banana Peel Paste, Proceedings of 7th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2022), 22-24 December, 2022, Khulna, Bangladesh.
8 Farhan Munim, Mubashir Bin Faruk, Md. Abul Hashem, Md. Anik Hasan, Sofia Payel (2022) Effect of saline water in beamhouse and wet-end processing in leather manufacturing, Proceedings of 7th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2022), 22-24 December, 2022, Khulna, Bangladesh.
7 Md. Abul Hashem, Md. Anik Hasan, Md. Shohag Milu, Sofia Payel (2022) Fabrication of construction material from leather buffing dust to manage solid waste, 5th International Conference on Academic Research in Science, Technology and Engineering (ICARSTE), Vienna, Austria, November 03-05, 2022.
6 Md. Abul Hashem, Mehedi Hasan, 
Md. Anik Hasan, Md. Sahariar Sahen, Sofia Payel, Al Mizan, Md. Shahruk Nur-A-Tomal, Composting of tannery limed fleshing: sustainable waste management, 9th International Conference on Engineering for Waste and Biomass Valorisation, WasteEng2022, Copenhagen, Denmark, June 27-30, 2022.
5 Md. Anik Hasan, Md. Abul Hashem, Sofia Payel, Laboratory scale brick fabrication from liming sludge: solid waste management in tannery, 6th International Leather Engineering Congress, November 25-26-, 2021, Izmir, Turkey.
4 Sofia Payel, Md. Abul Hashem, Md. Anik Hasan, Tannery liming sludge biochar modelling for adsorptive tannery wastewater treatment, 6th International Leather Engineering Congress, November 25-26-, 2021, Izmir, Turkey.
3 Md. Sanaul Haque, Kamrul Hasan, Md. Anik Hasan, Md. Abul Hashem, Goatskin preservation with Aegle Marmelos leaf paste to reduce pollution load in tannery, Proceedings of the 5th International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) 11-13 December, 2019, Chittagong, Bangladesh
2 Adhir Chandra Paul, Md. Anik Hasan, Md Mojeb Ali, Md Abdul Jalil, Md. Moshiur Rahman Tushar, Footstep power generation and performance analysis through different types of footwear styles, Proceedings of the 5th International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) 11-13 December, 2019, Chittagong, Bangladesh
1 Md. Navid Arman, Md. Anik Hasan, Md. Abul Hashem, Rafiul Alam, Md. Abdul Momen, Chromium removal from tannery wastewater through electrocoagulation, Proceedings of the 4th International Conference on Civil Engineering for Sustainable Development (ICCESD 2018), 9~11 February 2018, KUET, Khulna, Bangladesh




Course Conduction


Theory and Sessional Courses (Undergraduate): Theory Courses: Environmental Science and Engineering(LE 4121),Leather Microbiology(LE 3219),Tannery Waste Management(LE 4029),Computer Integrated Manufacturing Systems (CIMS)(LE 4123),Dyeing and Finishing II(LE 4207). Sessional Courses: Sessional on Environmental Science and Engineering(LE 4122),Sessional on Leather Microbiology(LE 3220),Sessional on Tannery Waste Management(LE 4030),Sessional on Computer Integrated Manufacturing Systems (CIMS)(LE 4124),Sessional on Dyeing & Finishing II(LE 4208),Sessional on Leather Products Engineering II(LE 3210),Sessional on Leather Products Engineering III(LE 4110).



 
Last Update: 04 Jan 2023