Adhir Chandra Paul
Assistant Professor
Department of Leather Engineering
Khulna University of Engineering & Technology (KUET)
Khulna -9203, Bangladesh. Phone: +880-41-769468-75 Ex.-759 (off.)
Cell: +880-1723 316 621, Fax: +880-41-774403, Mail : [email protected]
Website : www.kuet.ac.bd/le/acpaul/


National/International Journal

(Selected Papers)

7 Adhir Chandra Paul, Md. Elias Uddin*, Rama Kanta Layek, Tomas Saha, "Investigation on mechanical, gas barrier, and biodegradation properties of graphene oxide reinforced bovine trimmings derived collagen biocomposite", Polymers for Advanced Technologies, Wiley, 23 June 2023, Impact Factor:3.348,
https://doi.org/10.1002/pat.6142
6 Saurabh Dewangan, Saksham Saksham, Adhir Chandra Paul, and Jaka Burja, "A Comparative Analysis among Quenched, Tempered, and Stepped Cooled TIG Welded SS-304 Plates Based on Tensile Strength, Hardness, and Microstructural Appearance", , Journal of Advances in Materials Science and Engineering, Hindawi, pp. 5523162, 2023
https://doi.org/10.1155/2023/5523162
5 Md. Alamgir HOSSAIN, Md. Abdullah-Al-MAMUN, Adhir Chandra PAUL, "Energy Harvesting from Close Type Footwear: A Smart Design Approach", Textile & Leather Review, vol. 05, issue ISSN 2623-6281, pp. 253-267, 2022
https://doi.org/10.31881/TLR.2022.18
4 Md Abdulla Al Mamun, R Hasan, Md R Ahmed, AC Paul, RK Raha, "Antifungal Efficacy of Neem Leaves (Azadichta Indica) and Mahagony Fruit Bark (Swietenia Mahagony) Extracts on Leather Shoes", Bangladesh Journal of Scientific and Industrial Research (BJSIR), Bangladesh Academy of Sciences, vol. 54, issue 03, pp. 257-262, 2019 [PDF]
3 Md. Abdulla-Al-Mamun, Adhir Chandra Paul, Rajan Kumar Raha, Tasmin Wazeda Binty, "Cost-effective Different Ladies Jewelry from Leather Products Wastages", International Journal of Engineering Research & Technology, IJERT, vol. 08, issue 02, pp. 154-158, 2019
2 M.A. Hashem1*, A.C. Paul, S. Hossen and A. Hasan, "Renewable energy from the waste soles through thermal pyrolysis – A novel approach", Bangladesh Journal of Scientific and Industrial Research (BJSIR), Bangladesh Academy of Sciences, vol. Vol. 52, issue 2, pp. 141-146, 2017 [PDF]
1 Adhir Chandra Paul, Md. Abdullah-Al-Mamun, Sujit Kumer Ray, Md. Ashraful Islam, "Cost-effective Design Development of Medicated Footwear for Diabetic Patients", International Journal of Engineering Research & Technology, IJERT, vol. 04, issue 08, pp. 637-641, 2015.


National/International Conference

(Selected Papers)

20 Adhir Chandra Paul, Dr. Md. Elias Uddin and Shakawath Hosen Opu, "Collagen Protein Extraction from Fresh Hide Trimmings: Waste to Wealth Approach", 8th International Integrative Research Conference on Governance in Society, Business and Environment, INSEARCH 2022, BARD Comilla, Bangladesh, 29-30 December 2022
19 Adhir Chandra Paul, Md. Shehabur Rahman and Suman Biswas, "Acid dye Remediation through Pyrolytic Fresh Charcoal of Waste Footwear Sole", 5th International Conference on Academic Research in Science, Technology and Engineering (ICARSTE), Vienna, Austria, 03-05 November 2022
18 Adhir Chandra Paul, Md. Shahedur Rahman Rony, Md. Nafis Sadik and Nupur Paul, " Binary Logistic Regression Analysis of Elementary Schools Students' Foot Measurements: A Case Study from Bangladesh's Khulna Division" International Conference on New technologies, new materials and new forms of footwear sales, Zlín, Czech Republic, 26th October 2022
17 Adhir Chandra Paul, Md. Mojeb Ali, Abdul jail, "Chromium Removal from Tannery Waste Water Using Shorea Robusta Leaf Adsorbent", 7th International Integrative Research Conference on Governance in Society, Business and Environment, INSEARCH 2021, BARD Comilla, Bangladesh, 18-19 December 2021
16 Adhir Chandra Paul, Ayesha Akter and Pinkey Saha, "Exploration of Footwear Sole from Styrene Butadiene and Natural Rubber with Chrome Shaving as Filler", XXXVI IULTCS Congress 2021 (Congress of the international Union of Leather Technologists and Chemists Societies), Addis Ababa, Ethiopia, 03-05 November 2021
15 Md. Alamgir HOSSAIN, Md. Abdullah-Al-MAMUN, Adhir Chandra PAUL, "Innovation and Smart Footwear Design for Energy Harvesting: A Sustainable Approach", International Conference on New technologies, new materials and new forms of footwear sales, Zlín, Czech Republic, 21st October 2021
14 Adhir Chandra Paul, Nakib Javed Anjum, Sheikh Rejwan Alam, Nupur Paul, "Compatibility of Different Fusible Interlinings with Goat Nappa Leather", 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), ICMIEE-ID-037, KUET, Khulna-9203, Bangladesh, 19-21 December, 2020
13 Adhir Chandra paul, Md. Readul Alam Shuvo, Md. Moshiur Rahman Tushar, "Treatment of Tannery Wastewater through Calcium Carbonate from Mollusca (Snail Shell)", 5th NA International Conference on Industrial Engineering and Operations Management, Abstracting, IEOM-ID-159, pp. 717, Detroit, Michigan, USA, 10-14 August, 2020
12 Adhir Chandra paul, Syed Ishmam Rakin, A.S.M. Ragib Ahasan Munna, "Effect of Leather Trimming and Neem Fiber on the Mechanical and Thermal Property of Cement Based Materials", 6th International Conference on Chemical Engineering (ICChE), Poster Presentation, ICChE-2020-ID-133, BUET, Dhaka-1000, Bangladesh, 19-22 December, 2020 [PDF]
11 Adhir Chandra paul, Md. Nafis Sadik, Md. Shahedur Rahman Rony, "Variations of Foot Measurement of Primary School Going Students through Binary Logistic Regression Analysis-A Case Study in Khulna Region", 6th International Conference on Chemical Engineering (ICChE), Poster Presentation, ICChE-2020-ID-132, BUET, Dhaka-1000, Bangladesh, 19-22 December, 2020 [PDF]
10 Adhir Chandra paul, Md. Readul Alam Shuvo, Md. Moshiur Rahman Tushar, "Bio Catalytic Treatment of Tannery Wastewater through Calcium Carbonate from Mollusca (Snail Shell)", 6th International Conference on Chemical Engineering (ICChE), Poster Presentation, ICChE-2020-ID-130, BUET, Dhaka-1000, Bangladesh, 19-22 December, 2020 [PDF]
9 Adhir Chandra Paul, Md. Waliullah, Md. Asadullah Al Galib, "Utilization of Natural Dye Extracted from Spent Tea Leaves (Camellia Sinensis) for the Dyeing of Leather", 4th International Conference on Mechanical, Industrial and Materials Engineering (ICMIME), ICMIME-ID-RT-6, RUET, Rajshahi-6204, Bangladesh., 17-19 December, 2019 [PDF]
8 Adhir Chandra Paul, Md. Anik Hasan, Md Mojeb Ali, Md Abdul Jalil, Md. Moshiur Rahman Tushar, "Footstep Power Generation and Performance Analysis through Different Types of Footwear Styles", 5th International Conference on Mechanical Engineering and Renewable Energy (ICMERE), ICMERE-PI-88, CUET, Chittagong-4349, Bangladesh, 11-13 December, 2019 [PDF]
7 Adhir Chandra Paul, Jumman Khan, Rownack kamal, "Absorptive remediation of chromium contaminated tannery effluents by utilization of Mahagoni Tree (swietenia mahagoni) Bark", 5th International Conference on Mechanical Engineering and Renewable Energy (ICMERE), ICMERE-PI-87, CUET, Chittagong-4349, Bangladesh, 11-13 December, 2019 [PDF]
6 Adhir Chandra Paul, Noor-E-Imam, Shakhawath Hossain, "Application of lean and six sigma tool to waste reduction and productivity improvement in footwear industry", 5th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), ICMIEE-ID-260, KUET, Khulna-9203, Bangladesh, 23-24 December, 2018 [PDF]
5 Adhir Chandra Paul, Md. Atikul Islam, Md. Shohag Hossain, "Studies on Sewing Complication through Pareto Chart and Cause-Effect Diagram Analysis of a Footwear Industry", 5th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), ICMIEE-ID-261, KUET, Khulna-9203, Bangladesh, 23-24 December, 2018 [PDF]
4 Md. Nazmul Saif, Md. Alif Hossain, Adhir Chandra Paul , "Improvement of Productivity through Manipulating the Fabrication Layout in Sewing Department of a Footwear Industry", International Conference on Mechanical Industrial and Material Engineering (ICMIME), ICMIME-ID-IE-225, RUET, Rajshahi - 6204, Bangladesh., 28-30th December; 2017
3 Adhir Chandra Paul, Sk. Ahasanuzzaman, Anik Alam, "A study on the correlation between human left and right foot based on foot length and foot width and foot joint girth of Bangladeshi male", International Conference on Mechanical Industrial and Material Engineering (ICMIME), ICMIME-ID-RT-226, RUET, Rajshahi - 6204, Bangladesh, pp.01-06, 23-25th December; 2017 [PDF]
2 Md. Abul Hashem, Adhir Chandra Paul, Senju Hossain, "Utilization of waste sole as a source of energy through thermal pyrolysis", 11th International Conference on Mechanical Engineering, BUET, Dhaka-1000, Bangladesh, 2015
1 Sujit Kumar Ray, Adhir Chandra Paul, Md. Ashraful Islam, Mihir Dutta, "The development and Quality enhancement of medicated Footwear for consciousness about diabetic foot troubles for the diabetic patients", International Conference on Mechanical Engineering and Renewable Energy, ICMERE-PI-172, CUET, Chittagong-4349, Bangladesh, 26 - 29th November; 2015 [PDF]