Abu Jor
Assistant Professor
Department of Leather Engineering
Khulna University of Engineering & Technology (KUET)
Khulna -9203, Bangladesh. Phone: +88041-769468 ~ 75 Ext-8425
Cell: +880-1740585541, Mail : [email protected], [email protected]
Website : www.kuet.ac.bd/le/abujor/
This is Abu Jor serving as an Assistant Professor in the department of Leather Engineering at Khulna University of Engineering & Technology. I have completed my B.Sc. in Leather Engineering and M.Sc. in Industrial Engineering and Management from Khulna University of Engineering & Technology. My research interests include Footwear construction and materials, Safety footwear, Therapeutic footwear, Foot biomechanics, Foot deformities, Foot orthoses, Posture and balance, Ergonomics in design, Computational biomechanics.

Educational Records

Secondary School Certificate (SSC)
Kamalapur High School, Kushtia , Jessore Board, Bangladesh. (2007-2008)
Group: Science, Student Type: Regular, Result: Pass, CGPA: 4.81, CGPA Scale: 4.81,
 
Higher Secondary School Certificate (HSC)
Kushtia Govt. College, Kushtia, Jessore Board, Bangladesh. (2009-2010)
Group: Science, Student Type: Regular, Result: Pass, CGPA: 5.00, CGPA Scale: 5.00,
 
Bachelor of Science in Leather Engineering
Khulna University of Engineering & Technology (KUET), Bangladesh. (10 Feb 2011-2015)
Department: Leather Engineering, Student Type: Regular, Merit Position: 1st out of 60 students,
Result: Pass, Marks: 87.8%, CGPA: 3.86, CGPA Scale: 4.00,
Achievement: Three Times Deans Award;
 
Master of Science in Engg.
Khulna University of Engineering & Technology (KUET), Bangladesh. (Jan 2016-2019)
Student Type: Part time, Marks: 74%, CGPA: 3.50, CGPA Scale: 4.00,
Thesis Title: Prototype Development of a Joint Padded Metatarsal Cup to Enhance Female Foot Musculoskeletal Safety
 

Scholarship/Award Received

Deans Award
21-Dec-2017
Achieved three years consecutive Deans Award of performance from Faculty of Mechanical Engineering which is based on CGPA greater than 3.75 out of 4.00 in a year (For the session 2011-2012 2012-2013 and 2013-2014)
Merit Scholarship at Undergraduate Level
Achieved four years consecutive scholarship of performance from KUET which is based on result (For the session 2010-2011 2011-2012 2012-2013 2013-2014)
Prime Minister Gold Medal Award 2015
Achieved Prime Minister Gold Medal 2015 in Recognition of Securing the Highest marks/CGPA in Bachelor of Science in Leather Engineering Examination from the Faculty of Mechanical Engineering, KUET
University Gold Medal Award 2015
Achieved University Gold Medal 2015 in Recognition of Securing the 1st Position and Highest marks/CGPA in Bachelor of Science in Leather Engineering Examination from the Department of Leather Engineering, KUET

Service Record

Khulna University of Engineering & Technology, KUET
From 27-Jan-2019 to Present
Location: Khulna, Bangladesh
Position: Assistant Professor
Department/Section: Leather Engineering
Status: Full time
Responsibility: Theory Course Conduction, Sessional Course Conduction, Undergraduate Thesis supervision, Research Activities and Others
Khulna University of Engineering & Technology, KUET
From 29-Nov-2015 to 27-Jan-2019
Location: Khulna, Bangladesh
Position: Lecturer
Department/Section: Leather Engineering
Status: Full time
Responsibility: Theory Course Conduction, Sessional Course Conduction, Research Activities and Others

Research

Research Interests:
Footwear construction
Footwear materials
Safety footwear
Therapeutic footwear
Foot deformities
Foot orthoses
Foot biomechanics
Posture and balance
Ergonomics in design
Computational biomechanics

National/International Journal

(Selected Papers)

5 Md. Yeasir Abir, Khandaker Anisul Haq, Abu Jor, Azizur Rahman, "Development of a New Shoe Fitting for Obese Adults", Bangladesh Journal of Medical Science, Banglajol, vol. 21, issue 01 January, pp. 45-53, 2022
https://doi.org/10.3329/bjms.v21i1.56326
4 Abu Jor, Azizur Rahman, "Prototype Development of a Combined Padded Metatarsal Cup for High Heeled Footwear to Enhance Female Foot Musculoskeletal Safety", Kurume Medical Journal, Kurume University School of Medicine, vol. 66, issue 4, 2021
https://doi.org/10.2739/kurumemedj.MS664003
3 Abu Jor, Shovon Dash, Akash Singha Bappy, Azizur Rahman, "Foot Plantar Pressure Measurement Using Low Cost Force Sensitive Resistor (FSR): Feasibility Study", Journal of Scientific Research, vol. 11, issue 3, pp. 9, 2019
https://doi.org/10.3329/jsr.v11i3.40581 [PDF]
2 Abu Jor, Md. Shafaul Alam, and Md. Jakaria Alam, "Application of Six Sigma Concept in Shoe Manufacturing for Quality Improvements: A Case Study", European Journal of Advances in Engineering and Technology, www.ejaet.com, vol. 5, issue 7, pp. 450-458, 2018 [PDF]
1 Md. Abul Hashem, Md. Samsul Arefin, Abu Jor, "Gaseous air pollutants and its environmental effect emitted from the tanning industry at Hazaribagh,", American Journal of Engineering Research, AJER, vol. 04, issue 05, pp. 138-144, 2015 [PDF]


National/International Conference

(Selected Papers)

4 Md. Faysal Hassan, Sudipta Biswas, Abu Jor, Md. Samsul Arefin, "Investigation of Shoe Size and Toe Box Shape Variation effect on Skeletal Alignment of Adult Foot", Proceedings of the 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2020), Khulna, Bangladesh., 19-21 December 2020
3 Md. Elias Uddin and Abu Jor, "IN-SITU SYNTHESIS OF REDUCED GRAPHENE OXIDE-NIFE2O4 NANOCOMPOSITES AND ITS ELECTROCHEMICAL APPLICATIONS", International Conference on Mechanical, Industrial and Energy Engineering, ICMIE 2016, KUET, Khulna, Bangladesh, pp.5, 26-27 Dec 2016 [PDF]
2 Abu Jor, Md. Rafiul Hashar, and Md. Samsul Arefin, "CFD Analysis of Temperature Distribution and Thermal Comfort of Complete Footwear for Hot and Cold Country", International Conference on Mechanical Engineering, ICME 2015, BUET, Dhaka, Bangladesh, pp.8, 18-20 Dec 2015 [PDF]
1 Md. Abdul Zalil, Md. Abul Hashem, Abu Jor, "Aquatic effluence triggered by tannery during beamhouse and chrome tanning operations at Hazaribagh, Bangladesh", 3rd International Conference on Mechanical, Industrial and Energy Engineering, ICMIEE 2014, KUET, Khulna, Bangladesh, pp.5, 26-27 Dec 2014 [PDF]


Course Conduction


Theory Courses: LE 6043: Foot-Footwear Biomechanics and Ergonomics LE 3211: Footwear Engineering II LE 4217: Production & Quality Control LE 4123: Computer Integrated Manufacturing System LE 4213: Testing of Leather and Allied Materials LE 3107: Dyeing and Finishing I LE 4207: Dyeing and Finishing II LE 4121: Environmental Science and Engineering Sessional Courses: LE 3112: Footwear Engineering I LE 4112: Footwear Engineering III LE 4214: Testing of Leather & Allied Materials LE 4122: Environmental Science and Engineering

Supervision


Thesis Title: Application of Six Sigma Concept in Shoe Manufacturing for Quality Improvements: A Case Study
 
Last Update: 19 Aug 2022