Md. Al Amin
Assistant Professor
Department of Industrial Engineering and Management
Khulna University of Engineering & Technology (KUET)
Khulna -9203, Bangladesh. Phone: +880-41-769471 Ext. 8467
Cell: 01752076601, Mail : [email protected], [email protected]
Website : www.kuet.ac.bd/iem/alamin/

This is, Md. Al Amin currently serving as an Assistant Professor in the department of Industrial Engineering and Management at Khulna University of Engineering & Technology. I was served as a Lecturer from Nov,2015 to 27 Jan,2019 in the same department. I have completed my M.Sc. in Industrial Engineering and Management(IEM) & B.Sc. in Industrial & Production Engineering (IPE) from Khulna University of Engineering & Technology. I have 14 technical publications including 12 journal and 02 conference. My research interest includes.....  Operations research & management  Mathematics for Optimization  Statistical Quality control  Supply chain Management

Educational Records

SSC
Pakuria High School, Ishwardi, Pabna, Rajshahi, Bangladesh. -2008)
Group: Science, Result: A+, CGPA: 5.00, CGPA Scale: 5.00,
 
HSC
Ishurdi govt.college, Ishwardi, Pabna, Rajshahi, Bangladesh. -2010)
Group: Science, Result: A+, CGPA: 5.00, CGPA Scale: 5.00,
 
B.Sc. in Industrial & Production Engineering
Khulna University of Engineering & Technology, Bangladesh. (2011-2015)
Department: Industrial Engineering and Manage, Merit Position: 1st,
Marks: 87.80, CGPA: 3.86, CGPA Scale: 4.00,
Achievement: Gold medel
 
M.Sc Eng. in Industrial Engineering and Management
Khulna University of Engineering & Technology, Bangladesh. (2016-2019)
CGPA: 3.75, CGPA Scale: 4.00,
Thesis Title: Development of a Model to Optimize the Supply Chain Management and it’s Application
 


Scholarship/Award Received

Gold Medal Award for securing First Class First Position in B.Sc. Egg. Degree
4-Apr-2018
KUET excellence scholarship.
Ramiz Uddin smriti trust scholarship.
Bank Asia scholarship.
Exim Bank scholarship.


Service Record

Khulna University of Engineering & Technology (KUET)
From 27-Jan-2019 to Present
OrganizationType: University
Location: Khulna
Position: Assistant Professor
Department/Section: Industrial Engineering and Management
Working Area: Teaching & Research
Khulna University of Engineering & Technology
From 29-Nov-2015 to Present
OrganizationType: University
Location: Khulna-9203
Position: Lecturer
Department/Section: Industrial Engineering and Management
Working Area: Teaching & Rsearch


Research

Mathematics for Optimizations, Operations management & Research, Statistical Quality control, Supply Chain Management, Manufacturing Process


Books

Md. Al Amin, Usama Abdullah Rifat, Md. Golam Kibria, Thesis Book-UG: Performance Evaluation of Minimum Quantity Lubrication in Drilling Mild Steel and Aluminium, KUET, 2015

Md. Al Amin* and Azizur Rahman, Thesis Book-PG: Development of a Model to Optimize the Supply Chain Management and it’s Application, KUET, 2019

National/International Journal

(Selected Papers)

13 Md. Al Amin* and Arka Chakraborty, "Impact of Physical Factors of Workplace Environment on Workers Performance in Industry", Journal of Engineering Science , vol. 12, issue 3, pp. 57-66, 2022 [PDF]
12 Md. Al Amin, Apurba Das*, Sumit Roy, Md. Imran Shikdar, "Warehouse Selection Problem Solution by Using Proper MCDM Process", International Journal of Science and Qualitative Analysis, Science Publishing Group, vol. 5, issue 2, pp. 43-51, 2019
http://www.sciencepublishinggroup.com/journal/paperinfo?journalid=358&doi=10.11648/j.ijsqa.20190502. [PDF]
11 Md. Al Amin* and Azizur Rahman, "DEVELOPMENT OF A MODEL TO OPTIMIZE THE SUPPLY CHAIN TRANSPORTATION COST", Journal of Engineering Science, vol. 10, issue 1, pp. 67-76, 2019 [PDF]
10 Md. Al Amin*, Sumit Roy, Azizur Rahman and Md. Imran Shikdar, "IMPLEMENTATION OF 5S IN JUTE MILL: A CASE STUDY", Journal of Engineering Science, vol. 10, issue 1, pp. 77-84, 2019 [PDF]
9 Md. Al Amin, Amit Kumar Saha and Tanzira Ulfat Mohona, "Performance Improvement of Jute Industries using Theory of Constraints (TOC)", European Journal of Advances in Engineering and Technology, vol. 5, issue 5, pp. 303-311, 2018
http://ejaet.com/archive/volume-5-issue-5-2018/ [PDF]
8 Md. Al Amin, Usama Abdullah Rifat, Md. Habibur Rahman & Md. Golam Kibria, "Performance Analysis of Mild Steel (ASTM A36) under Varying Drilling Conditions using Taguchi and ANOVA", Global Journal of Researches in Engineering: J General Engineering, Global Journals, vol. 18, issue 3, pp. 7-15, 2018
https://globaljournals.org/GJRE_Volume18/E-Journal_GJRE_(J)_Vol_18_Issue_3.pdf [PDF]
7 Md. Al Amin1, Md. Rafiquzzaman1*, Md. Ariful Alam1, Radwan Ahmed Rahat1 and Rabiul Ahasan2, "Optimization of Design Parameters for Achieving Highest Impact Strength of Rice straw Based Polymer Composite Using Taguchi Method", International Journal of Emerging Engineering Research and Technology, SRYAHWA Publications, vol. 5, issue 10, pp. 22-29, 2017 [PDF]
6 Md. Rahat Hossain, Md. Hasan Ali, Md. Al Amin, Md. Golam Kibria, and Md. Shafiul Ferdous, "Fabrication and Performance Test of Aluminium Alloy-Rice Husk Ash Hybrid Metal Matrix Composite as Industrial and Construction Material", International Journal of Engineering Materials and Manufacture, Deer Hill Publications, vol. 2, issue 4, pp. 94-102, 2017 [PDF]
5 Mst. Nazma Sultana, Md. Rafiquzzaman and Md. Al Amin, "Experimental and Analytical Investigation of the Effect of Additives on Green Sand Mold Properties Using Taguchi Method", International Journal of Mechanical Engineering and Automation, Ethan Publishing Company, vol. 4, issue 4, pp. 109-119, 2017 [PDF]
4 Nafisa Nawal Huda1, Pranta Nath2, Md. Al Amin3, Md. Rafiquzzaman4, "Charpy Impact Behavior of Water Hyacinth Fiber Based Polymer Composite", Journal of Material Science & Manufacturing Technology, MANTECH PUBLICATIONS 2017, vol. 2, issue 2, pp. 1-13, 2017
http://www.mantechpublications.com/Journal-of-Material-Science-Manufacturing-Technology.html [PDF]
3 Md. Al Amin, Himadri Sen Gupta, Rahnuma Tarannum & Rabiul Ahasan, "An Approach to Develop Green Environment in Cement Industry by Proper Material Handling and Maintenance Management System- A Case Study", Global Journal of Researches in Engineering: G Industrial Engineering, Publisher: Global Journals Inc. (USA), vol. 17, issue 2, pp. 9-16, 2017
https://globaljournals.org/GJRE_Volume17/2-An-Approach-to-Develop.pdf [PDF]
2 Sumaiya Shahria, Md. Tariquzzaman, Md. Habibur Rahman*, Md. Al Amin, Md. Abdur Rahman, "Optimization of Molding Sand Composition for Casting Al Alloy", International Journal of Mechanical Engineering and Applications, Science Publishing Group, vol. 5, issue 3, pp. 155-161, 2017 [PDF]
1 Md Habibur Rahman and Md Al Amin, "An Empirical Analysis of the Effective Factors of the Production Efficiency in the Garments Sector of Bangladesh", European Journal of Advances in Engineering and Technology, vol. 3, issue 3, pp. 30-36, 2016 [PDF]


National/International Conference

(Selected Papers)

2 Md. Al Amin, Azizur Rahman, Asef Shahriar , "Application of Theory of Constraints in Supply Chain Management ", International Conference on Mechanical, Industrial and Energy Engineering , ICMIEE-KUET, Khulna-9203, pp.188(1-7), 20/12/2020 [PDF]
1 Md. Golam Kibria, Md. Al Amin, Usama Abdullah Rifat “Application of Porter’s Five Forces Model in Battery Manufacturing Industries of Bangladesh” paper id-140182;ICMIEE-PI-140101. International Conference on Mechanical, Industrial and Energy Engineering, 26-27 December, 2014, Khulna, BANGLADESH. [PDF]




Course Conduction


1. IPE 1201 (Manufacturing Process)

2. IPE 1203 (Engineering Materials)

3. ME 2111 (Engineering Mechanics)

4. IPE 3221 (Quality Management)

5. IPE 3223 (Material Handling and Maintenance Management)

6. IPE 4125 (Machine tools).

7. IPE 4029 (Marketing Management).

8. IPE 4129 (Industrial Management)

9. IPE 2207 (Statistics)

10. IPE 4027 (Computer Integrated Manufacturing)

11. IPE 4019 (Supply Chain Management)

12. IPE 3119 (Operations Management)








Student Corner











 
Last Update: 11 Jan 2022